Metric threaded rod, hexagonal end, class 5.8 STUDS 24x400mm - label - 1 pc.
R-STUDS-24400
5906675263977
Threaded rod with hexagonal tip
Define product parameters:
Contact with us and check out our terms of cooperation
R-STUDS-24400
5906675263977
Threaded rod with hexagonal tip
Define product parameters:
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Pump for blowing drill cuttings - plastic bag - 1 pc.
SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.
18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.
18 V RawlWRENCH 210 Nm Impact driver, Set with RawlCASE, 2 batteries 5.0 Ah and 6.5A RawlCHARGER - plastic case - 1 pc.
R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.
Threaded rod with hexagonal tip
Cracked concrete
Non-cracked concrete
Clay block
Aerated concrete
Aerated concrete block
Brick
Hollow brick
Approved surfaces
Air conditioning / ventilation
Anchoring glued in with threaded rods
Barriers
Ceiling mounts
Elevators and escalators
Pipelines
Steel structures
Diameter | Length | Rod end | Corrosion protection | Packaging and quantity | Index | EAN | Catalog price for pack. net |
|---|
R-STUDS Threaded Rod M24 x 300mm, Hex Head, Class 5.8 - cardboard box - 2 pcs.
Metric threaded rod, hexagonal head, steel class 8.8 STUDS 24x300mm - cardboard box - 5 pcs.
Metric threaded rod, hexagonal head, steel class 8.8, hot dip galvanized STUDS 24x300mm - cardboard box - 2 pcs.
R-STUDS Threaded Rod M24 x 300mm, Hex Head, A4 Stainless Steel - cardboard box - 2 pcs.
Metric threaded rod, hexagonal head, steel class 5.8, hot dip galvanized STUDS 24x300mm - cardboard box - 5 pcs.
Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product).
Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached.
Leave to solidify for the time required for the application.
Attach fixture and tighten the nut to the required torque.
Item is properly attached.
(11)