R-TFIX-TOOL-CSMP
5906675526478
TX40 Setting tool with integrated disc for countersunk installation of screw-in fixing R-TFIX-8S-X
Define product parameters:
Unit pack
1.00 pcs.0.52 kg
Bulk pack
16.00 pcs.8.64 kg
Pallet
384.00 pcs.207.29 kg
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
TX40 Setting tool with integrated disc for countersunk installation of screw-in fixing R-TFIX-8S-X
R-TFIX-8S-X: countersunk installation in EPS (R-TFIX-TOOL-CSMP)
Approved surfaces
Design Consulting
Training at the Rawlplug Academy center
Technical Support 2
Rawlplug Academy
Drill a hole of required diameter and depth.
Clean drilled hole 3 times.
Place the R-TFIX-TOOL-CSMP in the head of the R-TFIX-8S-X screw. Insert the plug into the drilled hole.
After inserting the dowel into the hole, the plate should be pressed against the thermal insulation surface. In substrates of category A, B, C, D, the minimum anchoring depth is 25 mm, in substrate E - aerated concrete - 45 mm.
Press the tip while tightening, maintaining its precise perpendicular position to the façade. Tighten the dowel screw until the appropriate anchoring depth is reached (the plate should rest on the thermal insulation surface).
After fixing the connector, close the hole with a mineral wool plug.
Correctly fastened pin.
