Application temperature from -10°C to +30°C.

Before use, make sure that the can has a positive temperature (optimal +20°C).

Wear protective gloves. Shake the can vigorously (approx. 30 seconds) to thoroughly mix the ingredients.

Screw the applicator to the can. The working working position is "upside down".

Fill the gaps from bottom to top, in a zigzag pattern, alternating from one side to the other. Fill the gaps up to 60% of the depth, but not more than 5 cm per layer. Gaps wider than 5 cm should be filled in layers, after the previous layer has hardened. Moisten each layer with water after application using a sprayer.