Hammer-in facade fixing with plastic pin TFIX-8P 155 mm - cardboard box - 200 pcs.
Universal
TFIX-8P-155-2
5906675092522
Define product parameters:
Length
Packaging and quantity
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Related products
Features
Versatile hammer-in facade fixing with plastic nail recommended for ETICS
- Can be used with additional KWL insulation holding plate, available in 90, 110 and 140 mm flange sizes (recommended for soft insulation materials such as mineral wool).
- Pre-assembled screw saves time and labour.
- Installation in all base materials (categories A,B,C,D,E)
- Expansion zone designed for low embedment depths, reducing the amount of drilling required.
- The plastic nail reduces heat transmission (value 0.0 W/K).
- Unique nylon pin design reinforced with glass fibre allows fast and trouble-free installation with correct expansion of the plug.
Product video
Rawlplug TFIX-8P Facade Fixing with Plastic Pin
TFIX-8P: surface installation in EPS
Substrates
Approved surfaces
Applications
Services
Technical Support 2
Rawlplug Academy
Designing
EasyFix
Installation guide
Installation manual
Installation step by step
1
Drill a hole of required diameter and depth.
2
Clean the hole.
3
Bottom side of the plate must be flush with the ETICS.
4
Lightly tap the plastic nail into the plastic sleeve until fixing is secure and flush with insulation material.
5
In soft insulation panels the fixing should be combined with insulation retaining plates KWL diameter 90, 110, 140 mm.