1. Mainpage
  2. Hammer-in facade fixing with plastic pin TFIX-8P 175 mm - cardboard box - 200 pcs.

Hammer-in facade fixing with plastic pin TFIX-8P 175 mm - cardboard box - 200 pcs.

Universal
Outlet

TFIX-8P-175

5906675078274

Universal hammer-in facade fixing with a plastic pin recommended for ETICS thermal insulation systems

Define product parameters:

Length
Packaging and quantity

Related products

Features

Universal hammer-in facade fixing with a plastic pin recommended for ETICS thermal insulation systems

  • Unique nylon pin design reinforced with glass fibre allows fast and trouble-free installation with correct expansion of the plug.
  • The plastic nail reduces heat transmission (value 0.0 W/K).
  • Installation in all base materials (categories A,B,C,D,E)
  • Expansion zone designed for low embedment depths, reducing the amount of drilling required.
  • Can be used with additional KWL insulation holding plate, available in 90, 110 and 140 mm flange sizes (recommended for soft insulation materials such as mineral wool).

Product video

Rawlplug TFIX-8P Facade Fixing with Plastic Pin

Substrates

Concrete C12/15-C50/60 (Use category A)

Concrete C12/15-C50/60 (Use category A)

External wall panel of concrete C16/20 – C50/60 (Use category A)

External wall panel of concrete C16/20 – C50/60 (Use category A)

Solid brick (Use category B)

Solid brick (Use category B)

Solid sand-lime brick (Use category B)

Solid sand-lime brick (Use category B)

Hollow brick (Use category C)

Hollow brick (Use category C)

Vertically-perforated clay block (Use category C)

Vertically-perforated clay block (Use category C)

Hollow sand-lime brick (Use category C)

Hollow sand-lime brick (Use category C)

Lightweight concrete block (Use category C)

Lightweight concrete block (Use category C)

Hollow lightweight concrete block (Use category D)

Hollow lightweight concrete block (Use category D)

Aerated concrete block (Use category D)

Aerated concrete block (Use category D)

Approved surfaces

Applications

Facades - thermal insulation systems

Plinths and finishing profiles

Substitutes

Services

Technical Support 2

Technical Support 2

Rawlplug Academy

Rawlplug Academy

Designing

Designing

Installation guide

Installation manual

Installation step by step

1

Drill a hole of required diameter and depth.

2

Clean the hole.

3

Bottom side of the plate must be flush with the ETICS.

4

Lightly tap the plastic nail into the plastic sleeve until fixing is secure and flush with insulation material.

5

In soft insulation panels the fixing should be combined with insulation retaining plates KWL diameter 90, 110, 140 mm.

Installation data

Approvals and publications

Technical library and approvals

Choose document:

ETA-13/0845

1488-CPR-0559/Z

DoP-13/0845 TFIX-8P

UKTA-22/6340

UKTA-DoP-22/6340-TFIX-8P

Product card and catalogues

Choose product catalog:

Specification Design Guide

General catalogue - PDF

Stay up to date

Sign up for our newsletter and don't miss:

Information

on our products and services

News

on the offering and latest promotions

Reports

on events, trade shows and industry conferences

© 2024 Koelner Rawlplug IP