1. Mainpage
  2. Products
  3. Anchors
  4. Chemical fixings
  5. R-PLS Plastic sleeve 12x50 mm - label - 1 pc.

R-PLS Plastic sleeve 12x50 mm - label - 1 pc.

Universal

K-P3-PLS-12050-10

5906675318370

The sleeve for reduced resin consumption and optimal mechanical interlock

Define product parameters:

Diameter
Length
Packaging and quantity

Catalog price for pc:

PLN2.63

net | VAT 23%

Contact with us and check out our terms of cooperation

Related products

Product info

The sleeve for reduced resin consumption and optimal mechanical interlock

  • Ensures that the anchor rod is properly centred
  • Threaded rod made of hot dip galvanized steel is suitable for outdoor use and in damp conditions
  • Size must be adjusted to the hole depth and diameter
  • Suitable for variable anchor embedment depths.
  • Reduces consumption of resin
  • Ideal for cleaning dust from drilled holes prior to applying bonded anchors or installing mechanical anchors
  • Hole cleaning is not necessary
  • Suitable for variable anchor embedment depths.

Surface:

Concrete C12/15-C50/60

Concrete C12/15-C50/60

Solid clay brick ≥ 20MPa

Solid clay brick ≥ 20MPa

Clay block

Clay block

Concrete hollow floor block (eg. Teriva)

Concrete hollow floor block (eg. Teriva)

Lightweight Concrete Block (Use category C)

Lightweight Concrete Block (Use category C)

Hollow Lightweight Concrete Block (Use category D)

Hollow Lightweight Concrete Block (Use category D)

Brick

Brick

Approved surfaces

Usage:

Anchoring glued in with reinforcing bars

Anchoring glued in with threaded rods

Balustrades

Barriers

Blinds and awnings

Blinds / curtain rods

Brackets

Concrete structures

Drilling

Electrical Installations

Formwork

Lighting

Machinery

Reinforcement of a large slab

Scaffolding

Storage racks

Ventilated facades

Poles and road signs

Product files

Assembly manual

Assembly step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Choose extensions and brushes to the selected depth and diameter of the hole, then combine them into one set.

3

Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.

4

Choose extensions and brushes to the selected depth and diameter of the hole, then combine them into one set.

5

Connect the drill set with the SDS tip.

6

Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.

7

Drill a hole to the required diameter and depth for rebar size being used.

8

Place the sleeve in the hole.

9

Place the threaded rod in the sleeve and wait until the resin is fully cured according to the information on the package.

10

Dispense resin 100% of the hole depth and close the sleeve plug.

11

After full curing of the anchor, install the fixed element with a proper torque.

12

Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product).

13

Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product).

14

Leave to solidify for the time required for the application.

15

Attach fixture and tighten the nut to the required torque.

16

Attach fixture and tighten the nut to the required torque.

Files to download

Downloadable documents and publications

Choose product catalog:

Catalogue

Rawlplug Academy

Chemical anchors, general characteristics and application - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors, basics of anchoring technology - temperature - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors basics of anchoring technology - substrates - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors basics of anchoring technology - rods- E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors general installation rules - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors - introduction and correct installation of anchors - ON-SITE TRAINING

Rules for the correct use of chemical anchors and their applications.

Chemical anchors - introduction and correct installation of anchors - TRAINING CENTER

Rules for the correct use of chemical anchors and their applications.