1. Mainpage
  2. Products
  3. Fixings
  4. Facade Fixings
  5. Hammer-in Pegs for Styrofoam
  6. KI-10N Long expansion zone hammer-in facade fixing with metal pin 10x120 mm - paper box - 250 pcs.

KI-10N Long expansion zone hammer-in facade fixing with metal pin 10x120 mm - paper box - 250 pcs.

Universal

KI-120N

5906675218045

Hammer-in facade fixing long expansion zone 60 mm for high performance in masonry, as well as lightweight and aerated concrete

Define product parameters:

Length
Packaging and quantity

Catalog price for bx:

PLN316.12

net | VAT 23%

Contact with us and check out our terms of cooperation

Related products

Aggressor SDS Plus drill bits 8x200x260 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Rebardrill SDS Plus drill bits 8x200x260 mm - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Rebardrill SDS Plus drill bits 8x150x210 mm - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Counterbore plastic cutter for EPS and mineral wool 63x20 mm - paper box - 1 pcs.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

600g dead blow hammer - label - 1 pc.

Hammer with a special system that absorbs the impact energy

18V 2.0J 20mm Cordless rotary hammer drill, Set with R-RC Rawlcase, 2 batteries 5.0Ah and 6,5 A charger - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

R-PGL Protective gloves for power tools 9" blue - paper hanger - 1 pc.

Protective gloves with special cushions to reduce vibration when working with power tools

R-KWL Insulation retaining plate 90 mm, PA - paper box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

R-KWL Insulation retaining plate 140 mm, PA - paper box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

KWL Insulation retaining PP plate 90 mm - paper box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

Mineral wool cap KES - 90x20 mm - paper box - 250 pcs.

Post-installed polystyrene cap reduces heat transmission and results in a homogenous insulation surface

Mineral wool cap KES - 63x20 mm - paper box - 250 pcs.

Post-installed polystyrene cap reduces heat transmission and results in a homogenous insulation surface

Product info

Hammer-in facade fixing long expansion zone 60 mm for high performance in masonry, as well as lightweight and aerated concrete

  • Can be used with additional KWL insulation holding plate, available in 90, 110 and 140 mm flange sizes (recommended for soft insulation materials such as mineral wool).
  • Plate stiffness (value 0.6 kN/mm) ensures smooth elevation surface and stable insulation system.
  • Reduction of thermal bridge formation (value 0,003 W/K), through the integration of an impact-resistant plastic overmoulding on the nail head.
  • Steel nail allows fast and trouble-free installation with correct expansion of the plug.
  • Approved for use in base material categories B, C, D, and E
  • Easy installation with best performance in lightweight base materials.

Surface:

Solid Brick (Use category B)

Solid Brick (Use category B)

Hollow Brick (Use category C)

Hollow Brick (Use category C)

Vertically-perforated clay block (Use category C)

Vertically-perforated clay block (Use category C)

Lightweight Concrete Block (Use category C)

Lightweight Concrete Block (Use category C)

Reinforced components of lightweight aggregate concrete (Use category D)

Reinforced components of lightweight aggregate concrete (Use category D)

Aerated Concrete Block (Use category D)

Aerated Concrete Block (Use category D)

Autoclaved Aerated Concrete (Use Category E)

Autoclaved Aerated Concrete (Use Category E)

Approved surfaces

Usage:

Facades - thermal insulation systems

Substitutes

Product files

Assembly manual

Assembly step by step

1

Drill a hole of required diameter and depth. Drilling depth of min 70 mm in approved materials.

2

Blow out dust at least 4 times with a hand pump.

3

Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached.

4

Lightly tap the plastic nail into the plastic sleeve until fixing is secure and flush with insulation material. Embedment depth of min 60 mm in approved materials.

5

In soft insulation panels the fixing should be combined with insulation retaining plates KWL 90, 110, 140 mm.

Installation data

Files to download

Technical library and approvals

Choose document:

ETA-07/0221

1488-CPR-0368/Z

DoP-07/0221 KI-10N

KOT-2021/1550

020_UWB-1064/Z

KDWU-2021-1550-KI10 N

UKTA-22/6343

UKTA-DoP-22/6343-KI-10N

TC 5856-19

AT-15-9119/2015 + A1

KDWU_15_9119_docieplenia

Downloadable documents and publications

Choose product card:

Product cart

Choose product catalog:

Catalogue

Rawlplug Academy

Facade fixings - general characteristics - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Facade fixings - selection of products for the application - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Facade thermal insulation fixings - Rawlplug's offer - ON-SITE TRAINING

Facade connectors - key parameters and assembly.

R-TFIX-8M - Hammer-in Facade anchors - ON-SITE TRAINING

You will learn what Rawlplug's R-TFIX-8M Rawlplug facade dowels are and what they are used for. You will understand their advantages and features determining the application. You will test the assembly yourself, learning about the installation risks.

MBA - metal Hammer-in Facade anchors - ON-SITE TRAINING

If you need to install wool using a non-flammable and certified product, this training is for you! You will learn the requirements and benefits of steel wool pins and the principles of their correct installation and strength tests.

Facade thermal insulation fixings - Rawlplug's offer - TRAINING CENTER

Facade connectors - key parameters and assembly.

R-TFIX-8M - stud facade stud hammered - TRAINING CENTER

You will learn what Rawlplug's R-TFIX-8M Rawlplug facade dowels are and what they are used for. You will understand their advantages and features determining the application. You will test the assembly yourself, learning about the installation risks.

MBA - metal Hammer-in Facade anchors - TRAINING CENTER

If you need to install wool using a non-flammable and certified product, this training is for you! You will learn the requirements and benefits of steel wool pins and the principles of their correct installation and strength tests.