FERC logos
  1. Mainpage
  2. Plastic mesh sleeve R-PLS 16x85mm - plastic bag - 10 pcs.

Plastic mesh sleeve R-PLS 16x85mm - plastic bag - 10 pcs.

Universal

R-PLS-16085-10

5906675347547

Plastic mesh sleeve for use with threaded rods in hollow substrates

Define product parameters:

Diameter
Length
Packaging and quantity

Related products

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Metric threaded rod, hexagonal head, steel class 5.8 STUDS 10x130mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel for use with bonded anchors

Metric threaded rod, hexagonal head, steel A4, STUDS 10x130mm - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

Metric threaded rod, hexagonal head- class 8.8, STUDS 10x130mm - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

Brickdrill SDS PLUS non-impact drill bits 16x260 mm - plastic hanger - 1 pc.

Drill bits for non-impact drilling in ceramic materials

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Metric threaded rod, hexagonal head, steel class 5.8 STUDS 10x130mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel for use with bonded anchors

Metric threaded rod, hexagonal head, steel A4, STUDS 10x130mm - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

Metric threaded rod, hexagonal head- class 8.8, STUDS 10x130mm - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

Brickdrill SDS PLUS non-impact drill bits 16x260 mm - plastic hanger - 1 pc.

Drill bits for non-impact drilling in ceramic materials

Features

Plastic mesh sleeve for use with threaded rods in hollow substrates

  • Ensures that the anchor rod is properly centred.
  • Hole cleaning is not necessary.
  • Size must be adjusted to the hole depth and diameter.
  • Suitable for variable anchor embedment depths.
  • Reduces consumption of resin.

Product video

Installation and use of polyester chemical anchor – Rawlplug's tutorial

Substrates

Hollow brick

Hollow brick

Hollow sand-lime brick

Hollow sand-lime brick

Clay block

Clay block

Ceramic hollow block

Ceramic hollow block

Hollow lightweight concrete block

Hollow lightweight concrete block

Concrete hollow floor block (eg. Teriva)

Concrete hollow floor block (eg. Teriva)

Approved surfaces

Applications

Anchoring glued in with threaded rods

Balustrades

Barriers

Blinds and awnings

Blinds / curtain rods

Scaffolding

Ventilated facades

Air conditioning / ventilation

Substitutes

Steel mesh sleeve 20mm 1 m for M16 rod - cardboard box - 10 pcs.

Metal mesh with galvanized coating for use with bonded anchors in hollow substrates and for the reinforcement system of large slabs

Steel mesh sleeve 20mm 1 m for M16 rod - cardboard box - 10 pcs.

Metal mesh with galvanized coating for use with bonded anchors in hollow substrates and for the reinforcement system of large slabs

Services

Design Consulting

Design Consulting

Technical Support 2

Technical Support 2

Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

EasyFix

EasyFix

Installation guide

Installation manual

Installation step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Place the sleeve in the hole.

3

Dispense resin 100% of the hole depth and close the sleeve plug.

4

After full curing of the anchor, install the fixed element with a proper torque.

5

Item is properly attached.

Approvals and publications

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

General catalogue - PDF