1. Mainpage
  2. Products
  3. Fixings
  4. Facade Fixings
  5. Hammer-in Pegs for Styrofoam
  6. Universal hammer-in facade fixing R-TFIX-8M 8x235 mm with nail - cardboard packaging - 100 pcs.

Universal hammer-in facade fixing R-TFIX-8M 8x235 mm with nail - cardboard packaging - 100 pcs.

Universal | Bestseller

R-TFIX-8M-235

5906675269481

Versatile hammer-in facade fixing with steel nail recommended for ETICS.

Define product parameters:

Length
Packaging and quantity

Catalog price for bx:

PLN 378.93

net | VAT 23%

Contact with us and check out our terms of cooperation

Accessories

600g dead blow hammer - paper label - 1 pc.

Hammer with a special system that absorbs the impact energy

Counterbore plastic cutter for EPS and mineral wool 63 mm - cardboard packaging - 1 pcs.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

Counterbore cutter for EPS and mineral wool 63x10 mm - cardboard packaging - 1 pcs.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

R-KWL Insulation retaining plate 90 mm, PA - cardboard packaging - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

R-KWL Insulation retaining plate 140 mm, PA - cardboard packaging - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

18V 2.0J 20mm Cordless rotary hammer drill, Set with R-RC Rawlcase, 2 batteries 5.0Ah and 6,5 A charger - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

R-TFIX-CAP EPS 63x10 mm, grey - cardboard packaging - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

R-TFIX-CAP EPS 63x10 mm, white - cardboard packaging - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

R-TFIX-CAP Mineral wool 63x10 mm - cardboard packaging - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

Aggressor SDS Plus drill bits 8x250x310 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Brickdrill SDS PLUS non-impact drill bits 8.0x310 m - plastic hanger - 1 pc.

Drill bits for non-impact drilling in ceramic materials

Rebardrill SDS Plus drill bits 8x250x310 mm - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Product info

Versatile hammer-in facade fixing with steel nail recommended for ETICS.

  • Quick and easy installation in all substrates (categories A,B,C,D,E)
  • Unique sleeve compression zone for precision installations.
  • Reduced point thermal transmittance to 0.001W/K for sizes 135-295mm and to 0.002W/K for sizes 95-115mm.
  • Pre-assembled components of the fixing allow you to save time
  • Highest loads with anchoring zone reduced in length to 25 mm
  • Excellent plate stiffness (value 1.0 kN/mm) ensures smooth elevation surface and stable insulation system.
  • Increased head diameter enabling centric hammer driving for improvedinstallation comfort

Surface:

Concrete C12/15-C50/60 (Use category A)

Concrete C12/15-C50/60 (Use category A)

External wall panel of concrete C16/20 – C50/60 (Use category A)

External wall panel of concrete C16/20 – C50/60 (Use category A)

Solid Brick (Use category B)

Solid Brick (Use category B)

Solid Sand-lime Brick (Use category B)

Solid Sand-lime Brick (Use category B)

Vertically-perforated clay block (Use category C)

Vertically-perforated clay block (Use category C)

Hollow Sand-lime Brick (Use category C)

Hollow Sand-lime Brick (Use category C)

Hollow Lightweight Concrete Block (Use category D)

Hollow Lightweight Concrete Block (Use category D)

Autoclaved Aerated Concrete (Use Category E)

Autoclaved Aerated Concrete (Use Category E)

Approved surfaces

Usage:

Facades - thermal insulation systems

Ventilated facades

Substitutes

Product files

Assembly manual

Assembly step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Clean drilled hole 3 times.

3

Insert the fixing into the drilled hole.

4

Drive the pin pin into the expansion sleeve until the pin, the pin plate and thermal insulation are aligned on one surface.

5

Correctly fastened R-TFIX-8M pin.

Files to download

Technical library and approvals

Choose document:

ETA-17/0592

1488-CPR-0545/Z

DoP-17/0592-R-TFIX-8M

UKTA-22/6290_R-TFIX-8M

UKTA-DoP-22/6290-R-TFIX-8M

KOT-2021/1550

020_UWB-1064/Z

Product library

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

Product Catalogue

Leaflet R_TFIX_8M

Rawlplug Academy

Facade fixings - general characteristics - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Facade fixings - selection of products for the application - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Facade thermal insulation fixings - Rawlplug's offer - ON-SITE TRAINING

Facade connectors - key parameters and assembly.

R-TFIX-8M - Hammer-in Facade anchors - ON-SITE TRAINING

You will learn what Rawlplug's R-TFIX-8M Rawlplug facade dowels are and what they are used for. You will understand their advantages and features determining the application. You will test the assembly yourself, learning about the installation risks.

MBA - metal Hammer-in Facade anchors - ON-SITE TRAINING

If you need to install wool using a non-flammable and certified product, this training is for you! You will learn the requirements and benefits of steel wool pins and the principles of their correct installation and strength tests.

Facade thermal insulation fixings - Rawlplug's offer - TRAINING CENTER

Facade connectors - key parameters and assembly.

R-TFIX-8M - stud facade stud hammered - TRAINING CENTER

You will learn what Rawlplug's R-TFIX-8M Rawlplug facade dowels are and what they are used for. You will understand their advantages and features determining the application. You will test the assembly yourself, learning about the installation risks.

MBA - metal Hammer-in Facade anchors - TRAINING CENTER

If you need to install wool using a non-flammable and certified product, this training is for you! You will learn the requirements and benefits of steel wool pins and the principles of their correct installation and strength tests.