Galvanized sleeve anchor for low loads KT M8x40 mm - cardboard box - 100 pcs.
KT-08040
5906675020129
Universal anchor for medium loads in non-cracked concrete
Define product parameters:
Contact with us and check out our terms of cooperation
KT-08040
5906675020129
Universal anchor for medium loads in non-cracked concrete
Define product parameters:
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Aggressor SDS Plus drill bits 10x150x210 mm - plastic hanger - 1 pc.
SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.
Aggressor SDS Plus drill bits 10x100x160 mm - plastic hanger - 1 pc.
Rebardrill SDS PLus drill bits 10x100x160 mm - plastic hanger - 1 pc.
18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.
Pump for blowing drill cuttings - plastic bag - 1 pc.
10mm HEX Holder 1/4" Impact Socket Cr-Mo 65mm L - plastic box - 3 pcs.
R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.
Rebardrill SDS Plus drill bits 10x50x110 mm - plastic hanger - 1 pc.
10mm 1/2" Cr-Mo Impact Socket 78mm L - plastic hanger - 1 pc.
R-HTW-20-100 Torque spanner 20-100 Nm 1/2" - plastic box - 1 pc.
Locksmith's hammer 0.5kg - label - 1 pc.
Universal anchor for medium loads in non-cracked concrete
Non-cracked concrete C20/25-C50/60
Reinforced concrete
Unreinforced concrete
Approved surfaces
Doors and windows
Radiators
Satellite dishes
Poles and road signs
Stainless steel A4 throughbolt R-HPTIIA4 8x60 mm - cardboard box - 100 pcs.
Zinc flake throughbolt R-HPTII-ZF 8x65 mm - cardboard box - 100 pcs.
Zinc flake coated hex with flange concrete screw anchor, R-LX-HF-ZF 8x60 mm - cardboard box - 100 pcs.
Zinc plated coated hex with flange concrete screw anchor R-LX-HF-ZP 8x60 mm - cardboard box - 100 pcs.
Stainless steel throughbolt- R-XPTII-A4 8x60 mm - cardboard box - 100 pcs.
Hot dip galvanized throughbolt R-XPTIIIHD 8x60 mm - cardboard box - 100 pcs.
Design Consulting
E-learning training
Learn moreTraining at the Rawlplug Academy center
Technical Support 2
Place the drill bit in the hole.
Blow out the dust at least 4 times with the hand pump.
Lightly tap the throughbolt through the fixture into hole with a hammer, until fixing depth is reached.
Tighten to the recommended torque.
The anchor is correctly fixed.
Mechanical anchors - introduction and correct installation of anchors - ON-SITE TRAINING
Mechanical anchors - Rawlplug's offer - ON-SITE TRAINING
Mechanical anchors - introduction and correct installation of anchors - TRAINING CENTER
Mechanical anchors - Rawlplug's offer - TRAINING CENTER
Mechanical anchors - introduction and correct installation of anchors - WEBINAR
Mechanical anchors - Rawlplug's offer - WEBINAR