Galvanized sleeve anchor for low loads KT M10x80 mm - cardboard box - 50 pcs.
KT-10080
5906675021324
Universal anchor for medium loads in non-cracked concrete
Define product parameters:
Contact with us and check out our terms of cooperation
KT-10080
5906675021324
Universal anchor for medium loads in non-cracked concrete
Define product parameters:
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.
Rebardrill SDS Plus drill bits 10x150x210 mm - plastic hanger - 1 pc.
Aggressor SDS Plus drill bits 12x150x210 mm - plastic hanger - 1 pc.
Rebardrill SDS PLus drill bits 10x100x160 mm - plastic hanger - 1 pc.
Rebardrill SDS Plus drill bits 12x150x210 mm - plastic hanger - 1 pc.
Aggressor SDS Plus drill bits 12x100x160 mm - plastic hanger - 1 pc.
18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.
Pump for blowing drill cuttings - plastic bag - 1 pc.
Rebardrill SDS Plus drill bits 12x100x160 mm - plastic hanger - 1 pc.
R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.
13mm HEX Holder 1/4" Impact Socket Cr-Mo 65mm L - plastic box - 3 pcs.
13mm 1/2" Cr-Mo Impact Socket 78mm L - plastic hanger - 1 pc.
Universal anchor for medium loads in non-cracked concrete
Non-cracked concrete C20/25-C50/60
Reinforced concrete
Unreinforced concrete
Approved surfaces
Doors and windows
Radiators
Satellite dishes
Poles and road signs
Stainless steel A4 throughbolt R-HPTIIA4 10x80 mm - cardboard box - 50 pcs.
Zinc Flake coated countersunk concrete screw anchor R-LX-CS-ZF 10x85 mm - cardboard box - 50 pcs.
Zinc flake coated hex with flange concrete screw anchor, R-LX-HF-ZF 10x85 mm - cardboard box - 50 pcs.
Design Consulting
E-learning training
Learn moreTraining at the Rawlplug Academy center
Technical Support 2
Place the drill bit in the hole.
Blow out the dust at least 4 times with the hand pump.
Lightly tap the throughbolt through the fixture into hole with a hammer, until fixing depth is reached.
Tighten to the recommended torque.
The anchor is correctly fixed.
Mechanical anchors - introduction and correct installation of anchors - ON-SITE TRAINING
Mechanical anchors - Rawlplug's offer - ON-SITE TRAINING
Mechanical anchors - introduction and correct installation of anchors - TRAINING CENTER
Mechanical anchors - Rawlplug's offer - TRAINING CENTER
Mechanical anchors - introduction and correct installation of anchors - WEBINAR
Mechanical anchors - Rawlplug's offer - WEBINAR