R-HLX-10X080-HF-ZF
5906675533827
Concrete screws induction hardened
Define product parameters:
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Concrete screws induction hardened
Approved surfaces
Rawlplug Academy
Design Consulting
Design tools
EasyFix
Drill the hole with a hammer drill (1a) ) to the required depth according to the table
Drill the hole a dust-free drill (1b) to the required depth according to the table
Clean the hole (blow dust at least 4 times with the hand pump). When using a dust-free drill bit (1b), it is not necessary to clean the hole..
Screw the concrete screw into the hole with an impact wrench and a suitable impact socket. Tighten until the fixture is clamped to the substrate. Installation with any tangential impact wrench. Finish screwing when the screw head touches the fastened element/substrate. The screw head must not be damaged
Possibility to unscrew the fixed anchor to a maximum height of 10mm. In the adjustment process, the permissible thickness of the fastened elements (Tfix) must be observed
Adjust the element and tighten until the fixture is clamped to the substrate. Installation with any impact wrench with tangential impact.
Finish screwing when the anchor touches the fastened element. The adjustment operation can be performed twice