Zinc plated throughbolt R-XPT 12x125 mm - cardboard box - 50 pcs.
R-XPT-12125/30
5906675233642
Define product parameters:
Contact with us and check out our terms of cooperation
R-XPT-12125/30
5906675233642
Define product parameters:
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.
Aggressor SDS Plus drill bits 12x250x310 mm - plastic hanger - 1 pc.
Rebardrill SDS Plus drill bits 12x150x210 mm - plastic hanger - 1 pc.
Aggressor SDS Plus drill bits 12x200x260 mm - plastic hanger - 1 pc.
Rebardrill SDS Plus drill bits 12x250x310 mm - plastic hanger - 1 pc.
18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.
Pump for blowing drill cuttings - plastic bag - 1 pc.
R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.
19mm 1/2" Cr-Mo Impact Socket 78mm L - plastic hanger - 1 pc.
R-HTW-20-100 Torque spanner 20-100 Nm 1/2" - plastic box - 1 pc.
Locksmith's hammer 0.8 kg - label - 1 pc.
Locksmith's hammer 0.5kg - label - 1 pc.
Throughbolt for non-cracked concrete
Rawlplug R-XPT Throughbolt Mechanical Anchor
Non-cracked concrete C20/25-C50/60
Concrete
Unreinforced concrete
Reinforced concrete
High-density natural stone
Approved surfaces
Balustrades
Barriers
Handrails
Poles and road signs
Profiled and cover sheets
Steel structures
Storage racks
Ventilated facades
Stainless steel A4 throughbolt R-HPTIIA4 12x125 mm - cardboard box - 50 pcs.
Zinc flake throughbolt R-HPTII-ZF 12x120 mm - cardboard box - 50 pcs.
Zinc plated coated hex with flange concrete screw anchor R-LX-HF-ZP 12x130 mm - cardboard box - 50 pcs.
Design Consulting
Training at the Rawlplug Academy center
Rawlplug Academy
Technical Support 2
Drill a hole to the required diameter and depth for rebar size being used.
Blow out the dust at least 4 times with the hand pump.
Lightly tap the throughbolt through the fixture into hole with a hammer, until fixing depth is reached.
Tighten to the recommended torque.
The anchor is properly fixed in the concrete base.
Mechanical anchors - general characteristics and application - E-LEARNING
Mechanical anchors - introduction and correct installation of anchors - ON-SITE TRAINING
Mechanical anchors - Rawlplug's offer - ON-SITE TRAINING
R-XPT - Throughbolts anchor - ON-SITE TRAINING
Mechanical anchors - introduction and correct installation of anchors - TRAINING CENTER
Mechanical anchors - Rawlplug's offer - TRAINING CENTER
R-XPT - Throughbolts anchor - TRAINING CENTER
Mechanical anchors - introduction and correct installation of anchors - WEBINAR
Mechanical anchors - Rawlplug's offer - WEBINAR
R-XPT - Throughbolts anchor - WEBINAR
Road and bridge fixings design calculation - SERVICE
Concrete fixings design calculation - SERVICE
Masonry fixings design calculation - SERVICE
Mechanical anchors on-site test - SERVICE