FERC logos
  1. Mainpage
  2. Brass Anchors for medium loads TM M5 mm - blister - 8 pcs.

Solid walls

B-TM05

5906675031545

Koelner

Brass anchor for medium loads suitable for all screws and studs with a metric thread

Define product parameters:

Metric diameter
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    16.00 bl0.49 kg

  • Bulk pack

    16.00 bl0.49 kg

  • Pallet

    3744.00 bl113.72 kg

Related products

18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.

R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.

Locksmith's hammer 0.5kg - label - 1 pc.

18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.

R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.

Locksmith's hammer 0.5kg - label - 1 pc.

Features

Brass anchor for medium loads suitable for all screws and studs with a metric thread

  • Special surface structure prevents from rotating in the hole.
  • The internal thread allows for the use of standard metric screws or threaded rods, and for surface flush removal and reuse of the fixing point. This provides great flexibility.
  • Fixing allows the attached item to be reusable.
  • Suitable for pre-positioned and push-through installation.
  • Low installation depth reduces amount of drilling.

Concrete

Concrete

Approved surfaces

Bathroom accessories

Cabinets, brackets and wall brackets

Curtain rods

Electrical Installations

Handrails

Metric diameter
Packaging and quantity
Index
EAN
Catalog price for bl. net

Brass sleeve with internal thread TM M5 mm - cardboard box - 100 pcs.

Brass sleeve with internal thread TM M5 mm - cardboard box - 100 pcs.

Installation manual

Installation step by step

1

Drill the hole and clean it up.

2

Blow out dust at least 4 times with a hand pump.

3

Insert the anchor into the hole and hammer it in until it is flush with the substrate.

4

Place the element to be fastened, insert the screw or threaded rod and tighten to the required torque.

Installation data

Catalogues and product cards

(2)

Product cards(1)

Product cart

Download
Catalogues(1)

Catalogue

Download