1. Mainpage
  2. R-BRUSH Steel brush for cleaning of deep holes, 14mm - plastic box - 1 pc.

R-BRUSH Steel brush for cleaning of deep holes, 14mm - plastic box - 1 pc.

Universal
New

R-BRUSH-14-TC

5906675432663

Steel cleaning brush for cleaning drilled holes with the possibility of extension

Define product parameters:

Diameter
Packaging and quantity

Related products

Features

Steel cleaning brush for cleaning drilled holes with the possibility of extension

  • Ideal for serial cleaning of deep holes.
  • Hole cleaning is necessary for correct loads
  • Suitable for variable anchor embedment depths.
  • Suitable for repetitive and frequent use.
  • Ideal for serial cleaning of deep holes.

Product video

Rawlplug Deep Anchorage and post-installed rebar accessories system

Substrates

Cracked concrete

Cracked concrete

Non-cracked concrete

Non-cracked concrete

Unreinforced concrete

Unreinforced concrete

Reinforced concrete

Reinforced concrete

Concrete slab

Concrete slab

Solid brick

Solid brick

Solid sand-lime brick

Solid sand-lime brick

Hollow brick

Hollow brick

Approved surfaces

Applications

Construction work

Drilling and screwing

Air conditioning / ventilation

Anchoring glued in with reinforcing bars

Anchoring glued in with threaded rods

Balustrades

Barriers

Blinds and awnings

Boilers

Sanitary and gas installations

Swings

TV brackets

Seats in public facilities

Substitutes

Services

Design Consulting

Design Consulting

E-learning training

E-learning training

Learn more
Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

Designing

Designing

Installation guide

Installation manual

Installation step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.

3

Choose extensions and brushes to the selected depth and diameter of the hole, then combine them into one set.

4

Connect the drill set with the SDS tip.

5

Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.

Approvals and publications

Product card and catalogues

Choose product card:

Product card R-BRUSH TC

Choose product catalog:

Specification Design Guide

General catalogue - PDF

Stay up to date

Sign up for our newsletter and don't miss:

Information

on our products and services

News

on the offering and latest promotions

Reports

on events, trade shows and industry conferences

© 2024 Koelner Rawlplug IP