Solid walls
R-DCA-06-25-100B
5906675441221
Define product parameters:
Length
Metric diameter
Coating
Packaging and quantity
This product has been withdrawn from sale.
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Related products
Features
Internally threaded zinc plated wedge anchor
- Product is covered with European Technical Assessment for multi-point non-structural fixings.
- Easy to install by hammer action and manual setting tool.
- Product was tested for construction fixing.
- High performance in cracked and non-cracked concrete confirmed by ETA.
- Product recommended for applications requiring fire resistance.
- Internally threaded to be used with threaded stud or bolt.
- Slotted sleeve and internal wedge component together facilitate easy setting and expansion.
Approved surfaces
Length | Metric diameter | Coating | Packaging and quantity | Index | EAN | Catalog price for pack. net |
|---|
Installation manual
Installation step by step
1
Drill the hole and clean it up.
2
Blow out dust at least 4 times with a hand pump.
3
Insert the anchor into the hole and hammer it in until it is flush with the substrate.
4
By striking the special hammer with the hammer, expand the anchor in the hole.
5
Place the element to be fastened, insert the screw or threaded rod and tighten to the required torque.
Installation data
Technical library
(8)
Catalogues and product cards
(4)