FERC logos
  1. Mainpage
  2. Telescopic sleeve with round plate R-GOK 50x385 mm polypropylene - cardboard box - 50 pcs.

Universal
Bestseller

R-GOK-385

5906675108117

Telescopic sleeve for flat roof insulation fixings

Download model Perform the calculations

Define product parameters:

Length
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    50.00 pcs.2.25 kg

  • Bulk pack

    50.00 pcs.2.25 kg

  • Pallet

    2000.00 pcs.89.88 kg

Features

Telescopic sleeve for flat roof insulation fixings

  • High impact - resistant material used ensures constant mechanical properties over the lifetime of a roof. Also, retains its properties over a wide temperature range.
  • The lenticular shape of the plate ensures a firm pressure on the membrane and no possibility of dragging and deforming the plate during assembly.
  • Internal sleeve design allows pre-assembly with any Rawlplug roofing screw, shortening installation.
  • The reduced diameter makes it easier to pierce the membrane and install in dense materials such as PIR / PUR and mineral wool.
  • The lower part of the connector telescope has been designed in the shape of a cone with an optimum angle of inclination which significantly affects the speed of its installation.
  • Guarantees the highest load capacity of the roof construction for both static and dynamic loads in accordance with ETAG006.

rawlplug_roofing_insul

Krok_po_kroku_jak_zamocowac_izolacje_dachu_plaskiego_za_pomoca_tulei_teleskopowych

Concrete

Concrete

Concrete slab

Concrete slab

Metal sheet & profiles

Metal sheet & profiles

Plywood

Plywood

Chipboard

Chipboard

Timber

Timber

Approved surfaces

Flat roofs

Length
Packaging and quantity
Index
EAN
Catalog price for pack. net

Installation manual

Installation step by step

1

Drill the hole of required diameter and depth.

2

Using drilling machine, drive the R-WBT screw into substrate until fixing depth is reached.

3

Properly mounted sleeve with R-WX screw.

4

Place the plastic sleeve with the WX screw in the insulating material.

5

Using a screwdriver, screw in the connector with the WX screw until the required depth is obtained.

6

Properly mounted sleeve with WX screw.

Installation data

Technical library

(5)

Technical assessments(2)

ETA-09/0346

Download

UKTA-0836-22/6338

Download
Declarations(2)

DoP-09/0346 GOK

Download

UKTA-DoP-22/6338-R-GOK

Download
Certificates(1)

1488-CPR-0560/Z

Download

Catalogues and product cards

(4)

Product cards(1)

Product cart 1516

Download
Catalogues(3)

Catalogue Offer (overview) - EN

Download

Specification Design Guide

Download

General Catalogue EN 2026/27

Download