FERC logos
  1. Mainpage
  2. Telescopic sleeve with round plate R-GOK-II 50x135 mm PP + WX-48T060 - cardboard box - 200 pcs.

Telescopic sleeve with round plate R-GOK-II 50x135 mm PP + WX-48T060 - cardboard box - 200 pcs.

Steel
New

R-GOKII135WX48T060

5906675529769

Rawlplug

Pre-assembled telescopic fastening system for trapezoid sheet substrate

Define product parameters:

Length
Screw length
Packaging and quantity

Related products

Round steel washer R-POK 40x6.5 mm with aluminum-zinc coating - cardboard box - 100 pcs.

Steel washer with special form for roofing applications, for use with all types of roofing screws.

Torx25 long bits, 200 mm - blister - 1 pc.

Long Torsion bits

Round steel washer R-POK 76x6.5 mm with aluminum-zinc coating - cardboard box - 100 pcs.

Steel washer with special form for roofing applications, for use with all types of roofing screws.

R-WX-T Self-drilling screws for steel T25 4.8x120 mm zinc flak coating - cardboard box - 200 pcs.

Screw for trapezoidal steel sheet – max thickness of 2x1.25 mm, TORX25 drive

Oval steel washer R-POW 80x40 mm 7.0 mm with aluminum-zinc coating - cardboard box - 100 pcs.

Steel washer with special form for roofing applications, for use with all types of roofing screws.

Torx25 long bits 100 mm - blister - 1 pc.

Long Torsion bits

R-WX-T Self-drilling screws for steel T25 4.8x140 mm zinc flak coating - cardboard box - 200 pcs.

Screw for trapezoidal steel sheet – max thickness of 2x1.25 mm, TORX25 drive

Torx25 long bits, 150 mm - blister - 1 pc.

Long Torsion bits

R-WX-T Self-drilling screws for steel T25 4.8x80 mm zinc flak coating - cardboard box - 250 pcs.

Screw for trapezoidal steel sheet – max thickness of 2x1.25 mm, TORX25 drive

R-WX-T Self-drilling screws for steel T25 4.8x100 mm zinc flak coating - cardboard box - 200 pcs.

Screw for trapezoidal steel sheet – max thickness of 2x1.25 mm, TORX25 drive

18 V RawlDRIVER Drywall screwdriver set with RawlCASE, 2 batteries 2.0 Ah, 1,5 Ah RawlCHARGER and automatic screw feeder - plastic case - 1 pc.

The RawlDriver 18V cordless screwdriver with 1/4" handle gives the possibility of quick and stable installation in G-K boards.

18 V RawlDRIVER 70Nm Cordless drill driver, Set with RawlCASE, 2 batteries 5.0Ah and 6.5A RawlCHARGER - plastic case - 1 pc.

Drill/driver 18V 70 Nm for screwdriving depending on the hardness of the material.

Round steel washer R-POK 40x6.5 mm with aluminum-zinc coating - cardboard box - 100 pcs.

Steel washer with special form for roofing applications, for use with all types of roofing screws.

Torx25 long bits, 200 mm - blister - 1 pc.

Long Torsion bits

Round steel washer R-POK 76x6.5 mm with aluminum-zinc coating - cardboard box - 100 pcs.

Steel washer with special form for roofing applications, for use with all types of roofing screws.

R-WX-T Self-drilling screws for steel T25 4.8x120 mm zinc flak coating - cardboard box - 200 pcs.

Screw for trapezoidal steel sheet – max thickness of 2x1.25 mm, TORX25 drive

Oval steel washer R-POW 80x40 mm 7.0 mm with aluminum-zinc coating - cardboard box - 100 pcs.

Steel washer with special form for roofing applications, for use with all types of roofing screws.

Torx25 long bits 100 mm - blister - 1 pc.

Long Torsion bits

R-WX-T Self-drilling screws for steel T25 4.8x140 mm zinc flak coating - cardboard box - 200 pcs.

Screw for trapezoidal steel sheet – max thickness of 2x1.25 mm, TORX25 drive

Torx25 long bits, 150 mm - blister - 1 pc.

Long Torsion bits

R-WX-T Self-drilling screws for steel T25 4.8x80 mm zinc flak coating - cardboard box - 250 pcs.

Screw for trapezoidal steel sheet – max thickness of 2x1.25 mm, TORX25 drive

R-WX-T Self-drilling screws for steel T25 4.8x100 mm zinc flak coating - cardboard box - 200 pcs.

Screw for trapezoidal steel sheet – max thickness of 2x1.25 mm, TORX25 drive

18 V RawlDRIVER Drywall screwdriver set with RawlCASE, 2 batteries 2.0 Ah, 1,5 Ah RawlCHARGER and automatic screw feeder - plastic case - 1 pc.

The RawlDriver 18V cordless screwdriver with 1/4" handle gives the possibility of quick and stable installation in G-K boards.

18 V RawlDRIVER 70Nm Cordless drill driver, Set with RawlCASE, 2 batteries 5.0Ah and 6.5A RawlCHARGER - plastic case - 1 pc.

Drill/driver 18V 70 Nm for screwdriving depending on the hardness of the material.

Features

Pre-assembled telescopic fastening system for trapezoid sheet substrate

  • High impact - resistant material used ensures constant mechanical properties over the lifetime of a roof. Also, retains its properties over a wide temperature range.
  • The lenticular shape of the plate ensures a firm pressure on the membrane and no possibility of dragging and deforming the plate during assembly
  • The lower part of the connector telescope has been designed in the shape of a cone with an optimum angle of inclination which significantly affects the speed of its installation.
  • Internal sleeve design allows pre-assembly with any Rawlplug roofing screw, shortening installation.
  • Hardened screw's thread surface. High quality anti-corrosion coating guarantees resistance of 15 Kesternich cycles.
  • The shape and type of screw's thread is designed specifically for trapezoid sheet substrate
  • Reduced drilling point ensures optimal tightness and correct hole diameter in thin metal sheets.
  • The reduced diameter makes it easier to pierce the membrane and install in dense materials such as PIR / PUR and mineral wool
  • Pre-assembled sleeve with a screw shortens the assembly time, additionally it has a security in the form of a locking O-ring, which prevents the screw from slipping out.
  • Guarantees the highest load capacity of the roof construction for both static and dynamic loads in accordance with ETAG006.

Substrates

Metal sheet & profiles

Metal sheet & profiles

Approved surfaces

Applications

Flat roofs

Substitutes

Telescopic sleeve with round plate R-GOK-II 50x135 mm polypropylene - cardboard box - 200 pcs.

Telescopic sleeve for flat roof insulation fixings

Telescopic sleeve with round plate R-GOK-II 50x135 mm PP + WBT-61050 - cardboard box - 200 pcs.

Pre-assembled telescopic fastening system for concrete substrate and timber

Telescopic sleeve with round plate R-GOK-II 50x135 mm PP + WBT-61075 - cardboard box - 200 pcs.

Pre-assembled telescopic fastening system for concrete substrate and timber

Telescopic sleeve with round plate R-GOK-II 50x135 mm PP + WO-48T060 - cardboard box - 200 pcs.

Pre-assembled telescopic fastening system for trapezoid sheet substrate and timber

Telescopic sleeve with round plate R-GOK-II 50x135 mm PP + WX-48T050 - cardboard box - 200 pcs.

Pre-assembled telescopic fastening system for trapezoid sheet substrate

Telescopic sleeve with round plate R-GOK-II 50x135 mm PP + WX-48T070 - cardboard box - 200 pcs.

Pre-assembled telescopic fastening system for trapezoid sheet substrate

Telescopic sleeve with round plate R-GOK-II 50x135 mm polypropylene - cardboard box - 200 pcs.

Telescopic sleeve for flat roof insulation fixings

Telescopic sleeve with round plate R-GOK-II 50x135 mm PP + WBT-61050 - cardboard box - 200 pcs.

Pre-assembled telescopic fastening system for concrete substrate and timber

Telescopic sleeve with round plate R-GOK-II 50x135 mm PP + WBT-61075 - cardboard box - 200 pcs.

Pre-assembled telescopic fastening system for concrete substrate and timber

Telescopic sleeve with round plate R-GOK-II 50x135 mm PP + WO-48T060 - cardboard box - 200 pcs.

Pre-assembled telescopic fastening system for trapezoid sheet substrate and timber

Telescopic sleeve with round plate R-GOK-II 50x135 mm PP + WX-48T050 - cardboard box - 200 pcs.

Pre-assembled telescopic fastening system for trapezoid sheet substrate

Telescopic sleeve with round plate R-GOK-II 50x135 mm PP + WX-48T070 - cardboard box - 200 pcs.

Pre-assembled telescopic fastening system for trapezoid sheet substrate

Services

EasyFix

EasyFix

Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

Design calculations

Design calculations

Technical Support 2

Technical Support 2

Installation guide

Installation manual

Installation step by step

1

Place the plastic sleeve R-GOK-II with the R-WX screw in the insulating material.

2

Using a driver, screw in the R-GOK-II connector with the R-WX screw until the appropriate depth is achieved.

3

Properly mounted sleeve R-GOK-II with R-WX screw.

Installation data

Approvals and publications

Technical library and approvals

Choose document:

ITB-KOT-2022/2206 w1

020-UWB-1121/Z

KDWU-2022-2206-GOK-II

KDWU-2022-2206-R-WX

ETA-23/0198

1488-CPR-0697/Z

DoP-23/0198-R-GOK-II

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

General catalogue - PDF

Stay up to date

Sign up for our newsletter and don't miss:

Information

on our products and services

News

on the offering and latest promotions

Reports

on events, trade shows and industry conferences

ContactAbout RawlplugInvestor relationsPrivacy policyGeneral Terms & Conditions of PurchaseTerms & Conditions of WebsiteTechnical FAQTechnical library

© 2024 Koelner Rawlplug IP