FERC logos
  1. Mainpage
  2. R-MBA Metal insulation fixing 8x250mm, stainless steel - cardboard box - 125 pcs.

R-MBA Metal insulation fixing 8x250mm, stainless steel - cardboard box - 125 pcs.

Universal
New

R-MBA-SS-08250

5906675561233

Fire-resistant metal insulation fixing stainless steel

Perform the calculations

Define product parameters:

Length
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    125.00 pcs.4.55 kg

  • Bulk pack

    125.00 pcs.4.55 kg

  • Pallet

    6750.00 pcs.245.81 kg

Features

Fire-resistant metal insulation fixing stainless steel

  • Metal facade fixing, recommended for use when fire resistance (F120) is a requirement.
  • Fast and simple hammer-set installation reduces working times.
  • Accessory spreader plate, MKC-SS (85mm diameter) also available for installation of soft insulation materials such as mineral wool.
  • Extensive dimensional range allows anchorage of insulation boards up to 250mm thick.
  • Made of high quality stainless steel to increase resistance to damage.
  • For countersunk installation, we recommend using the R-KFS-90/20 cutter and the R-TFIX-CAP90-MW mineral wool cup.

Product video

R_MBA_monta_zag__bionywwe_niemineralnej

R_MBA_monta_powierzchniowywwe_niemineralnej

Krok_po_kroku_jak_montowac_metalowe_kolki_fasadowe

Substrates

Concrete C20/25-C50/60 (A)

Concrete C20/25-C50/60 (A)

Solid brick (B)

Solid brick (B)

Solid sand-lime brick (B)

Solid sand-lime brick (B)

Ceramic hollow block

Ceramic hollow block

Hollow sand-lime brick ≥ 15MPa

Hollow sand-lime brick ≥ 15MPa

Aerated concrete

Aerated concrete

Approved surfaces

Applications

Facades - thermal insulation systems

Full list of variations

Length
Packaging and quantity
Index
EAN
Catalog price for pack. net

Substitutes

Metal insulation fixing R-MBA 8x250 mm - cardboard box - 125 pcs.

Fire-resistant metal insulation fixing

Metal insulation fixing R-MBA 8x250 mm - cardboard box - 125 pcs.

Fire-resistant metal insulation fixing

Services

Installation guide

Installation manual

Installation step by step

1

Drill hole to the required diameter and depth for rebar size being usee

2

Blow out dust at least 3 times with a hand pump.

3

Gently drive the steel dowel into the hole until the correct anchorage depth for the fastener is achieved. For soft substrates, use the MKC 85 mm steel washer.

4

Correctly installed steel facade fixing.

5

Cut the hole in insulation board.

6

Drill a hole of appropriate diameter and depth.

7

Clean drilled hole 3 times.

8

Gently drive the steel dowel into the hole until the correct anchorage depth for the fastener is achieved. For soft substrates, use the MKC 85 mm steel washer.

9

Insert cap into countersunk hole in insulation board following installation of the facade fixing.

10

Correctly installed steel facade fixing.

Installation data

Approvals and publications

Technical library

(3)

Technical assessments(1)

KOT_RAWLPLUG_MBA_R_MBA

ITB-KOT-2018/0721w6

Download
Declarations(1)

KDWU_2018_0721_6_MBA_FACADE_FIXINGS_PL_1_

KDWU-2018-0721-R-MBA

Download
Certificates(1)

020_UWB_0702Z_PL_

020-UWB-0702/Z

Download

Catalogues and product cards

(4)

Product cards(1)

Technical card R-MBA

Download
Catalogues(3)

Catalogue Offer (overview) - EN

Download

Specification Design Guide

Download

General Catalogue EN 2026/27

Download