R-NOZ dispensing tip M28-M50mm - plastic bag - 1 pc.
Universal
New
R-NOZ-P-28-50
5906675433981
Define product parameters:
Hole diameter
Packaging and quantity
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Related products
Features
Resin dispensing tip in deep holes
- Absence of air bubbles in the hole.
- Dispensing of the appropriate volume of the resin.
- Uniform resin injection into the hole
- Full control over the degree to which the hole is filled with resin
Product video
Jak prawidłowo wykonać głębokie wklejanie prętów zbrojeniowych?
Rawlplug Deep Anchorage and post-installed rebar accessories system
Substrates
Approved surfaces
Applications
Services
Design Consulting
Technical Support 2
Training at the Rawlplug Academy center
Design Consulting
Installation guide
Installation manual
Installation step by step
1
Prepare the resin for application. Unscrew the safety plug.
2
Cut the PISTON PLUG with the required hole diameter.
3
Cut the PISTON PLUG with the required hole diameter.
4
Cut off about 10 cm of unmixed resin, then connect the other end of the hose to the resin mixer.
5
Connect the Piston PLUG tip to the Dosing PLUG tip.
6
Start dispensing the resin: the resin being injected will now be pushing the plug out of the hole (like a piston).