R-NOZ dispensing tip set M16-M50mm - plastic bag - 1 pc.
Universal
New
R-NOZ-P-SET
5906675447841
Define product parameters:
Packaging and quantity
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Related products
Features
Resin dispensing tip in deep holes, set M16-M26+M28-M50
- Absence of air bubbles in the hole.
- Dispensing of the appropriate volume of the resin.
- Uniform resin injection into the hole
- Full control over the degree to which the hole is filled with resin
Product video
Jak prawidłowo wykonać głębokie wklejanie prętów zbrojeniowych?
Rawlplug Deep Anchorage and post-installed rebar accessories system
Substrates
Approved surfaces
Applications
Services
Design Consulting
E-learning training
Learn moreTraining at the Rawlplug Academy center
Technical Support 2
Installation guide
Installation manual
Installation step by step
1
Cut off about 10 cm of unmixed resin, then connect the other end of the hose to the resin mixer.
2
Cut the PISTON PLUG with the required hole diameter.
3
Connect the Piston PLUG tip to the Dosing PLUG tip.
4
Start dispensing the resin: the resin being injected will now be pushing the plug out of the hole (like a piston).
5
Prepare the resin for application. Unscrew the safety plug.
6
Cut the PISTON PLUG with the required hole diameter.