TFIX-8S-A2-175
5906675071503
Universal screw-in facade fixings with plastic overmoulded screw with plastic overmoulded screw
Define product parameters:
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Universal screw-in facade fixings with plastic overmoulded screw with plastic overmoulded screw
Approved surfaces
Design Consulting
Training at the Rawlplug Academy center
Rawlplug Academy
Designing
Drill a hole to the required diameter and depth for rebar size being used.
Insert the fixing into the drilled hole.
Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached.
When tightening, press the tip, keeping it precisely perpendicular to the elevation.
Tighten the plug screw until the appropriate embedding depth is reached (the plate should be on the surface with a thermal insulation layer).
Correctly installed TFIX-8S pin.
