FERC logos
  1. Mainpage
  2. Universal screw-in facade integrated insulation cap and cutter 8x455 mm - cardboard box - 50 pcs.

Universal screw-in facade integrated insulation cap and cutter 8x455 mm - cardboard box - 50 pcs.

Universal
Outlet

TFIX-8ST-455

5906675335148

The first thermal insulation combination screw fixing that can be countersunk together with the integrated insulation cap.

Define product parameters:

Length
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    50.00 pcs.5.23 kg

  • Bulk pack

    50.00 pcs.5.23 kg

  • Pallet

    2000.00 pcs.209.04 kg

Related products

18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

18 V RawlDRIVER 60Nm Cordless drill driver, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 RawlCHARGER - plastic case - 1 pc.

18V 60Nm Cordless drill/driver

Installation tool for TFIX-8ST - paper hanger - 1 pcs.

Accessory for installation of screw fixing TFIX-8ST with T40 bit

18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

18 V RawlDRIVER 60Nm Cordless drill driver, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 RawlCHARGER - plastic case - 1 pc.

18V 60Nm Cordless drill/driver

Installation tool for TFIX-8ST - paper hanger - 1 pcs.

Accessory for installation of screw fixing TFIX-8ST with T40 bit

Features

The first thermal insulation combination screw fixing that can be countersunk together with the integrated insulation cap.

  • The long plastic overmoulding on the TFIX-8ST screw minimises thermal bridging (value 0.001-0,002W/K), contributing to energy-saving benefits.
  • Unique design allows for high load-bearing capacities. This reduces the quantity of fixings required per square metre of insulation.
  • Unique sleeve compression zone for precision installations.
  • Integrated insulation cap (with unique surface reinforcement) equalizes thermal conductivity over the fixing point, whilst also leveling out drying times of render.
  • Accurate countersunk setting automatically sets the fixing flush with the insulation layer.
  • Plate stiffness (value 0.5 kN/mm) ensures smooth elevation surface and stable insulation system.
  • Pre-assembled screw saves time and labour.
  • The shortest embedment depth is 25 mm at the maximum strength parameters.
  • Simple countersunk installation in all substrates (A,B,C,D,E).

Product video

Rawlplug TFIX-8ST Installation

TFIX - 8ST - animation

TFIX - 8ST - installation

Rawlplug TFIX-8ST Universal Screw-in Facade Fixing

Rawlplug Academy: jaki łącznik fasadowy wybrać

Substrates

Concrete C12/15-C50/60 (A)

Concrete C12/15-C50/60 (A)

Solid brick (B)

Solid brick (B)

Solid sand-lime brick (B)

Solid sand-lime brick (B)

Vertically-perforated clay block (C)

Vertically-perforated clay block (C)

Hollow sand-lime brick (C)

Hollow sand-lime brick (C)

Hollow lightweight concrete block (D)

Hollow lightweight concrete block (D)

Aerated concrete block (D)

Aerated concrete block (D)

Hollow brick (C)

Hollow brick (C)

Lightweight concrete block (C)

Lightweight concrete block (C)

Lightweight concrete

Lightweight concrete

Approved surfaces

Applications

Facades - thermal insulation systems

Full list of variations

Length
Type of package
Pieces. per pack.
Index
EAN
Catalog price for pack. net

Substitutes

Universal screw-in facade integrated cutter 8.0x455 mm - cardboard box - 50 pcs.

Thermal insulation combination screw fixing that can be countersunk together with the integrated perforator for installation with insulation cap

Universal screw-in facade integrated cutter 8.0x455 mm - cardboard box - 50 pcs.

Thermal insulation combination screw fixing that can be countersunk together with the integrated perforator for installation with insulation cap

Installation guide

Installation manual

Installation step by step

1

Drill a hole of the appropriate diameter and depth.

2

Clean drilled hole 3 times.

3

Insert the fixing into the drilled hole.

4

Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached.

5

When tightening, press the tip, keeping it precisely perpendicular to the elevation.

6

Tighten the plug screw until the appropriate embedment depth is reached (the plate should be on one surface with the thermal insulation layer).

7

Correctly fastened pin.

Installation data

Approvals and publications

Technical library

(5)

Technical assessments(2)

ETA-11/0144 (2014-04-04)

Screwed-in anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry

Download

UKTA-22/6339 (2022-11-11)

Screwed-in anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry

Download
Declarations(2)

DoP-11/0144 TFIX-8ST (ETA-11/0144)

Screwed-in anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry

Download

UKTA-DoP-22/6339-TFIX-8ST (2023-10-02)

Screwed-in anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry

Download
Certificates(1)

1488-CPR-0269/Z (ETA-11/0144)

Screwed-in anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry

Download