1. Mainpage
  2. Products
  3. Fixings
  4. Roofing Fixings
  5. Roof Sleeve
  6. Telescopic sleeve with round plate R-GOK-II 50x65 mm polypropylene - paper box - 400 pcs.

Telescopic sleeve with round plate R-GOK-II 50x65 mm polypropylene - paper box - 400 pcs.

Universal
New

R-GOK-II-065

5906675528472

Telescopic sleeve for flat roof insulation fixings

Define product parameters:

Length
Packaging and quantity

Catalog price for bx:

PLN236.52

net | VAT 23

Contact with us and check out our terms of cooperation

Related products

TORX 25 45 mm bit with M5 thread - plastic box- 10 pcs.

Torx T25 bit with M5 thread

750 mm adapter for bits with M5 thread - plastic box - 1 pc.

Threaded bit adapters

500 mm adapter for bits with M5 thread - plastic box - 1 pc.

Threaded bit adapters

Aggressor SDS Plus drill bits 5x150x210 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Aggressor SDS Plus drill bits 5x100x160 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Aggressor SDS Plus drill bits 5x50x110 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Rebardrill SDS Plus drill bits 5x150x210 mm - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

RoofSystem SDS Plus adapter 800 mm - plastic box - 1 pc.

Roofsystem SDS Plus Adapter

RoofSystem SDS Plus adapter 500 mm - plastic box - 1 pc.

Roofsystem SDS Plus Adapter

RoofSystem SDS Plus adapter 1000 mm - plastic box - 1 pc.

Roofsystem SDS Plus Adapter

18 V RawlDRIVER Drywall screwdriver set with RawlCASE, 2 batteries 2.0 Ah, 1,5 Ah RawlCHARGER and automatic screw feeder - plastic case - 1 pc.

The RawlDriver 18V cordless screwdriver with 1/4" handle gives the possibility of quick and stable installation in G-K boards.

18 V RawlDRIVER 70Nm Cordless drill driver, Set with RawlCASE, 2 batteries 5.0Ah and 6.5A RawlCHARGER - plastic case - 1 pc.

Drill/driver 18V 70 Nm for screwdriving depending on the hardness of the material.

TORX 25 45 mm bit with M5 thread - plastic box- 10 pcs.

Torx T25 bit with M5 thread

750 mm adapter for bits with M5 thread - plastic box - 1 pc.

Threaded bit adapters

500 mm adapter for bits with M5 thread - plastic box - 1 pc.

Threaded bit adapters

Aggressor SDS Plus drill bits 5x150x210 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Aggressor SDS Plus drill bits 5x100x160 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Aggressor SDS Plus drill bits 5x50x110 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Rebardrill SDS Plus drill bits 5x150x210 mm - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

RoofSystem SDS Plus adapter 800 mm - plastic box - 1 pc.

Roofsystem SDS Plus Adapter

RoofSystem SDS Plus adapter 500 mm - plastic box - 1 pc.

Roofsystem SDS Plus Adapter

RoofSystem SDS Plus adapter 1000 mm - plastic box - 1 pc.

Roofsystem SDS Plus Adapter

18 V RawlDRIVER Drywall screwdriver set with RawlCASE, 2 batteries 2.0 Ah, 1,5 Ah RawlCHARGER and automatic screw feeder - plastic case - 1 pc.

The RawlDriver 18V cordless screwdriver with 1/4" handle gives the possibility of quick and stable installation in G-K boards.

18 V RawlDRIVER 70Nm Cordless drill driver, Set with RawlCASE, 2 batteries 5.0Ah and 6.5A RawlCHARGER - plastic case - 1 pc.

Drill/driver 18V 70 Nm for screwdriving depending on the hardness of the material.

Product info

Telescopic sleeve for flat roof insulation fixings

  • High impact - resistant material used ensures constant mechanical properties over the lifetime of a roof. Also, retains its properties over a wide temperature range.
  • Should be used with combination of any Rawlplug roofing screws: R-WBT to concrete, R-WX/WO to steel sheat, R-WW to wood.
  • The lenticular shape of the plate ensures a firm pressure on the membrane and no possibility of dragging and deforming the plate during assembly
  • Internal sleeve design allows pre-assembly with any Rawlplug roofing screw, shortening installation.
  • The lower part of the connector telescope has been designed in the shape of a cone with an optimum angle of inclination which significantly affects the speed of its installation.
  • Guarantees the highest load capacity of the roof construction for both static and dynamic loads in accordance with ETAG006.
  • The reduced diameter makes it easier to pierce the membrane and install in dense materials such as PIR / PUR and mineral wool
  • Pre-assembled sleeve with a screw shortens the assembly time, additionally it has a security in the form of a locking O-ring, which prevents the screw from slipping out.
  • The engraving on the plate reduces the effect of the notch and crack propagation (spreading of damage in the material subjected to stress).

Surface:

Concrete

Concrete

Reinforced concrete

Reinforced concrete

Concrete Slab

Concrete Slab

Hollow-core Slab

Hollow-core Slab

Metal Sheet & Profiles

Metal Sheet & Profiles

Timber

Timber

Oriented Strand Board

Oriented Strand Board

Chipboard

Chipboard

Light wood wool boards

Light wood wool boards

Fiber cement boards

Fiber cement boards

Hollow core roof plate

Hollow core roof plate

Approved surfaces

Usage:

Flat roofs

Substitutes

Telescopic sleeve with round plate R-GOK 50x65 mm polypropylene - paper box - 400 pcs.

Telescopic sleeve for flat roof insulation fixings

Telescopic sleeve with round plate R-GOK 50x65 mm polypropylene - paper box - 400 pcs.

Telescopic sleeve for flat roof insulation fixings

Services

EasyFix

Dowiedz się więcej

Training at the Rawlplug Academy center

Dowiedz się więcej

Design calculations

Dowiedz się więcej

Technical Support 2

Dowiedz się więcej

Product files

Assembly manual

Assembly step by step

1

Place the plastic sleeve R-GOK-II with the R-WX screw in the insulating material.

2

Using a driver, screw in the R-GOK-II connector with the R-WX screw until the appropriate depth is achieved.

3

Properly mounted sleeve R-GOK-II with R-WX screw.

4

Drill the hole in concrete of required diameter and depth.

5

Place the plastic sleeve R-GOK-II with the R-WBT screw in the insulating material.

6

Using a driver, screw in the R-GOK-II connector with the R-WBT screw until the appropriate depth is achieved.

7

Properly mounted sleeve R-GOK-II with R-WBT screw.

8

Place the plastic sleeve R-GOK-II with the R-WO screw in the insulating material.

9

Using a driver, screw in the R-GOK-II connector with the R-WO screw until the appropriate depth is achieved.

10

Properly mounted sleeve R-GOK-II with R-WO screw.

Installation data

Files to download

Technical library and approvals

Choose document:

ITB-KOT-2022/2206 w1

020-UWB-1112/Z

KDWU-2022-2206-GOK-II

ETA-23/0198

1488-CPR-0697/Z

DoP-23/0198-R-GOK-II

Downloadable documents and publications

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

Product Catalogue