Zinc flake coated hex with flange concrete screw anchor R-LX-HF-ZF 6x50 mm - cardboard box - 100 pcs.
R-LX-06X050-HF-ZF
5906675129594
Define product parameters:
Contact with us and check out our terms of cooperation
R-LX-06X050-HF-ZF
5906675129594
Define product parameters:
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Aggressor SDS Plus drill bits 6x100x160 mm - plastic hanger - 1 pc.
Rebardrill SDS Plus drill bits 6x100x160 mm - plastic hanger - 1 pc.
Aggressor SDS Plus drill bits 6x150x210 mm - plastic hanger - 1 pc.
SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.
Rebardrill SDS Plus drill bits 6x150x210 mm - plastic hanger - 1 pc.
18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.
18 V RawlWRENCH 210 Nm Impact driver, Set with RawlCASE, 2 batteries 5.0 Ah and 6.5A RawlCHARGER - plastic case - 1 pc.
Pump for blowing drill cuttings - plastic bag - 1 pc.
R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.
10mm 1/2" Cr-Mo Impact Socket 78mm L - plastic hanger - 1 pc.
Self-tapping concrete screwbolt
Rawlplug R-LX mechanical concrete screw anchor - tutorial and principle of operation
Mechanical concrete screw anchor – Rawlplug's instruction
Non-cracked concrete C20/25-C50/60
Unreinforced concrete
Reinforced concrete
Cracked concrete C20/25-C50/60
High-density natural stone
Approved surfaces
Balustrades
Concrete structures
Formwork
Gates
Scaffolding
Seats in public facilities
Storage racks
Temporary fixings
Zinc flake coated countersunk concrete screw anchor R-LX-CS-ZF 6x50 mm - cardboard box - 100 pcs.
Zinc plated coated countersunk concrete screw anchor R-LX-CS-ZP 6x50 mm - cardboard box - 100 pcs.
Zinc plated coated hex with flange concrete screw anchor R-LX-HF-ZP 6x50 mm - cardboard box - 100 pcs.
Zinc plated throughbolt R-XPT 6x65 mm - cardboard box - 100 pcs.
Design Consulting
Training at the Rawlplug Academy center
EasyFix
Technical library
Drill a hole to the required diameter and depth for rebar size being used.
Blow out the dust at least 4 times with the hand pump.
Can be unscrewed and screwed back in.
Tighten to the recommended torque.
The anchor is installed correctly
Mechanical anchors - general characteristics and application - E-LEARNING
Mechanical anchors - product characteristics - R-LX - E-LEARNING
Mechanical anchors - introduction and correct installation of anchors - ON-SITE TRAINING
Mechanical anchors - Rawlplug's offer - ON-SITE TRAINING
R-LX - screw anchor - ON-SITE TRAINING
Mechanical anchors - introduction and correct installation of anchors - TRAINING CENTER
Mechanical anchors - Rawlplug's offer - TRAINING CENTER
R-LX - screw anchor - TRAINING CENTER
Mechanical anchors - introduction and correct installation of anchors - WEBINAR
Mechanical anchors - Rawlplug's offer - WEBINAR
R-LX - screw anchor - WEBINAR
Road and bridge fixings design calculation - SERVICE
Concrete fixings design calculation - SERVICE
Masonry fixings design calculation - SERVICE
Mechanical anchors on-site test - SERVICE