1. Mainpage
  2. Products
  3. Fixings
  4. Facade Fixings
  5. Screw-In Sticks for Styrofoam
  6. Universal scres-in facade fixings with plastic overmoulded screw R-TFIX-8S 8x355 - cardboard packaging - 100 pcs.

Universal scres-in facade fixings with plastic overmoulded screw R-TFIX-8S 8x355 - cardboard packaging - 100 pcs.

Universal | Bestseller

R-TFIX-8S-355

5906675417592

Versatile screw-in facade fixing with high performance in all base materials recommended for ETICS

Define product parameters:

Length
Packaging and quantity

Catalog price for bx:

PLN 1,199.22

net | VAT 23%

Contact with us and check out our terms of cooperation

Accessories

Counterbore plastic cutter for EPS and mineral wool 63 mm - cardboard packaging - 1 pcs.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

Counterbore cutter for EPS and mineral wool 63x10 mm - cardboard packaging - 1 pcs.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

R-KWL Insulation retaining plate 90 mm, PA - cardboard packaging - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

R-KWL Insulation retaining plate 140 mm, PA - cardboard packaging - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

R-KWX Insulation retaining plate 110 mm with perforator - cardboard packaging - 100 pcs.

Joining retaining plate with perforator for countersunk installation in mineral wool insulation boards

R-KWX Insulation retaining plate 63 mm with perforator - cardboard packaging - 100 pcs.

Joining retaining plate with perforator for countersunk installation in mineral wool insulation boards

18V 100Nm Cordless impact drill driver, Set with R-RC Rawlcase, 2 batteries 5.0Ah and 6,5A charger - plastic case - 1 pc.

Impact drill/driver 18V 100 Nm for drilling and screwdriving depending on the hardness of the material.

18V 2.0J 20mm Cordless rotary hammer drill, Set with R-RC Rawlcase, 2 batteries 5.0Ah and 6,5 A charger - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

R-TFIX-CAP EPS 63x10 mm, grey - cardboard packaging - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

R-TFIX-CAP EPS 63x10 mm, white - cardboard packaging - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

R-TFIX-CAP Mineral wool 63x10 mm - cardboard packaging - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

R-TFIX-8S Setting tool TX40 for countersunk installation, green - cardboard packaging - 1 pcs.

TX40 Setting tool with integrated disc for countersunk installation of screw-in fixing R-TFIX-8S

R-TFIX-8S Setting tool TX40 for surface installation, red - cardboard packaging - 1 pcs.

TX40 Setting tool with integrated disc for surface installation of screw-in fixing R-TFIX-8S

Aggressor SDS Plus drill bits 8x400x460 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Brickdrill SDS PLUS non-impact drill bits 8.0x460 m - plastic hanger - 1 pc.

Drill bits for non-impact drilling in ceramic materials

Rebardrill SDS Plus drill bits 8x400x460 mm - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Product info

Versatile screw-in facade fixing with high performance in all base materials recommended for ETICS

  • Unique design allows for high load-bearing capacities. This reduces the quantity of fixings required per square metre of insulation
  • Pre-assembled screw saves time and labour.
  • Quick and easy installation in all substrates (categories A,B,C,D,E)
  • Unique sleeve compression zone for precision installations.
  • Plate stiffness (value 0.5 kN/mm) ensures smooth elevation surface and stable insulation system.
  • The long plastic overmoulding on the R-TFIX-8S screw minimises thermal bridging (value 0,001-0,002W/K), contributing to energy-saving benefits
  • The shortest embedment depth at the maximum strength parameters.

Surface:

Concrete C12/15-C50/60 (Use category A)

Concrete C12/15-C50/60 (Use category A)

External wall panel of concrete C16/20 – C50/60 (Use category A)

External wall panel of concrete C16/20 – C50/60 (Use category A)

Solid Brick (Use category B)

Solid Brick (Use category B)

Solid Sand-lime Brick (Use category B)

Solid Sand-lime Brick (Use category B)

Vertically-perforated clay block (Use category C)

Vertically-perforated clay block (Use category C)

Hollow Lightweight Concrete Block (Use category D)

Hollow Lightweight Concrete Block (Use category D)

Autoclaved Aerated Concrete (Use Category E)

Autoclaved Aerated Concrete (Use Category E)

Approved surfaces

Usage:

Facades - thermal insulation systems

Plinths and finishing profiles

Substitutes

Product files

Assembly manual

Assembly step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Clean drilled hole 3 times.

3

Place the T40 mounting tip in the recess of the plastic part of the R-TFIX-8S screw, insert the pin into the drilled hole.

4

When tightening, press the tip, keeping it precisely perpendicular to the elevation.

5

Tighten the plug screw until the appropriate embedding depth is reached (the plate should be on the surface with a thermal insulation layer).

6

Correctly installed R-TFIX-8S.

Installation data

Files to download

Technical library and approvals

Choose document:

ETA-17/0161

1488-CPR-0544/Z

DoP-07/0161 R-TFIX-8S

KOT-2021/1550

020_UWB-1064/Z

UKTA-22/6348

UKTA-DoP-22/6348-R-TFIX-8S

Product library

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

Product Catalogue

Leaflet R-TFIX-8S_SX

Rawlplug Academy