R-TFIX-TOOL-CS
5906675421636
TX40 Setting tool with integrated disc and perforator for countersunk installation of screw-in fixing R-TFIX-8SX
Define product parameters:
Unit pack
1.00 pcs.0.20 kg
Bulk pack
12.00 pcs.2.83 kg
Pallet
288.00 pcs.67.92 kg
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
TX40 Setting tool with integrated disc and perforator for countersunk installation of screw-in fixing R-TFIX-8SX
Approved surfaces
Type of package | Piece. per pack. | Index | EAN | |
|---|---|---|---|---|
Cardboard box | 1 | R-TFIX-TOOL-CS | 5906675421636 | Contact with us and check out our terms of cooperation |
Design Consulting
Training at the Rawlplug Academy center
Technical Support 2
Rawlplug Academy
Drill a hole to the required diameter and depth for rebar size being used.
Clean drilled hole 3 times.
Insert R-TFIX-TOOL-CS into recess in head moulding of R-TFIX-8S-X screw.
Tighten the plug screw until the appropriate embedding depth is reached (the plate should be on the surface with a thermal insulation layer).
After setting the pin in the hole, the plate should be pressed against the thermal insulation surface.
After fixing the connector, close the hole with a mineral wool plug.
R-TFIX-8SX pin is properly installed.
(1)
