1. Mainpage
  2. Products
  3. Fixings
  4. Facade Fixings
  5. Hammer-in Pegs for Styrofoam
  6. KI-10M hammer-in facade fixing with metal pin 10x260 mm - paper box - 200 pcs.

KI-10M hammer-in facade fixing with metal pin 10x260 mm - paper box - 200 pcs.

Universal

KI-260M

5906675212845

Hammer-in facade fixing with steel nail for countersunk installation with additional insulation cap

Define product parameters:

Length
Packaging and quantity

Catalog price for bx:

PLN349.43

net | VAT 23%

Contact with us and check out our terms of cooperation

Related products

Aggressor SDS Plus drill bits 8x200x260 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Aggressor SDS Plus drill bits 8x150x210 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Rebardrill SDS Plus drill bits 8x200x260 mm - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Rebardrill SDS Plus drill bits 8x150x210 mm - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Counterbore plastic cutter for EPS and mineral wool 63x20 mm - paper box - 1 pcs.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

600g dead blow hammer - label - 1 pc.

Hammer with a special system that absorbs the impact energy

18V 2.0J 20mm Cordless rotary hammer drill, Set with R-RC Rawlcase, 2 batteries 5.0Ah and 6,5 A charger - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

R-KWL Insulation retaining plate 90 mm, PA - paper box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

R-KWL Insulation retaining plate 140 mm, PA - paper box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

KWL Insulation retaining PP plate 90 mm - paper box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

Mineral wool cap KES - 90x20 mm - paper box - 250 pcs.

Post-installed polystyrene cap reduces heat transmission and results in a homogenous insulation surface

Mineral wool cap KES - 63x20 mm - paper box - 250 pcs.

Post-installed polystyrene cap reduces heat transmission and results in a homogenous insulation surface

Product info

Hammer-in facade fixing with steel nail for countersunk installation with additional insulation cap

  • Can be used with additional KWL insulation holding plate, available in 90, 110 and 140 mm flange sizes (recommended for soft insulation materials such as mineral wool).
  • Installation in all base materials (categories A,B,C,D,E)
  • Expansion zone designed for low embedment depths, reducing the amount of drilling required.
  • Fixing recommend for countersunk installation (with post-installed insulation cap) reduces heat transmission and results in a homogenous insulation surface
  • Plate stiffness (value 0.4 kN/mm) ensures smooth elevation surface and stable insulation system.
  • Steel nail allows fast and trouble-free installation with correct expansion of the plug.
  • Optimal product parameters enable cost-saving solutions.

Surface:

Concrete C20/25-C50/60

Concrete C20/25-C50/60

Hollow-core Slab

Hollow-core Slab

Aerated Concrete

Aerated Concrete

Solid Brick

Solid Brick

Lightweight Concrete Block

Lightweight Concrete Block

Solid Sand-lime Brick

Solid Sand-lime Brick

Hollow Lightweight Concrete Block

Hollow Lightweight Concrete Block

Hollow Sand-lime Brick

Hollow Sand-lime Brick

Reinforced components of lightweight aggregate concrete

Reinforced components of lightweight aggregate concrete

Approved surfaces

Usage:

Facades - thermal insulation systems

Substitutes

Product files

Assembly manual

Assembly step by step

1

Cut the hole in insulation board.

2

Drill a hole of appropriate diameter and depth.

3

Hammer the steel nail into the plastic sleeve until fixing is secure and flush with insulation material. Embedment depth of min 25 mm in base materials category A, B, C (concrete, solid and perforated bricks), 40 mm in base materials category D (lightweight concrete blocks) and 60 mm in aerated concrete.

4

Insert cap into countersunk hole in insulation board following installation of the facade fixing.

5

Proper recessed installation.

Installation data

Files to download

Technical library and approvals

Choose document:

ETA-07/0291

1488-CPR-0368/Z

DoP-07/0291 KI-10M

KOT-2021/1550

020_UWB-1064/Z

KDWU-2021/1550-1_KI_10M

UKTA-22/6369

UKTA-DoP-22/6369-KI-10M

AT-15-8091/2015

AT-15-9119/2015 + A1

KDWU_15-8091-KI10_M_OLD

Downloadable documents and publications

Choose product card:

Product cart

Choose product catalog:

Catalogue

Rawlplug Academy

Facade fixings - general characteristics - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Facade fixings - selection of products for the application - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Facade thermal insulation fixings - Rawlplug's offer - ON-SITE TRAINING

Facade connectors - key parameters and assembly.

R-TFIX-8M - Hammer-in Facade anchors - ON-SITE TRAINING

You will learn what Rawlplug's R-TFIX-8M Rawlplug facade dowels are and what they are used for. You will understand their advantages and features determining the application. You will test the assembly yourself, learning about the installation risks.

MBA - metal Hammer-in Facade anchors - ON-SITE TRAINING

If you need to install wool using a non-flammable and certified product, this training is for you! You will learn the requirements and benefits of steel wool pins and the principles of their correct installation and strength tests.

Facade thermal insulation fixings - Rawlplug's offer - TRAINING CENTER

Facade connectors - key parameters and assembly.

R-TFIX-8M - stud facade stud hammered - TRAINING CENTER

You will learn what Rawlplug's R-TFIX-8M Rawlplug facade dowels are and what they are used for. You will understand their advantages and features determining the application. You will test the assembly yourself, learning about the installation risks.

MBA - metal Hammer-in Facade anchors - TRAINING CENTER

If you need to install wool using a non-flammable and certified product, this training is for you! You will learn the requirements and benefits of steel wool pins and the principles of their correct installation and strength tests.