1. Mainpage
  2. Pneumatic gun for cartridges R-GUN 380ml - cardboard box - 1 pc.

Pneumatic gun for cartridges R-GUN 380ml - cardboard box - 1 pc.

Universal

R-GUN-380-PNEU

5906675286068

Professional pneumatic gun for resin anchors in cartridges 380ml

Define product parameters:

Variation
Packaging and quantity

Related products

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 385 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Polyester bonded anchor R-KEM-II standard, stone - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard, grey - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.

Protective gloves with special cushions to reduce vibration when working with power tools

Dustlessdrill SDS Plus 12x200x320 mm drill bits - plastic hanger - 1 pc.

Hollow drill bits SDS plus for dust-free drilling in concrete

Dustlessdrill SDS Plus 16x250x370 mm drill bits - plastic hanger - 1 pc.

Hollow drill bits SDS plus for dust-free drilling in concrete

18 V RawlDRIVER 60Nm Cordless drill driver, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 RawlCHARGER - plastic case - 1 pc.

18V 60Nm Cordless drill/driver

Features

Professional pneumatic gun for resin anchors in cartridges 380ml

  • Type of gun used for anchoring strictly depends on the type of cartridge
  • Fast and effortless resin injection
  • Convenient dispensing tool for a range of situations
  • Robust design for all jobsite conditions

Substrates

Cracked concrete

Cracked concrete

Non-cracked concrete

Non-cracked concrete

Hollow-core slab

Hollow-core slab

Solid brick

Solid brick

Solid sand-lime brick

Solid sand-lime brick

Hollow brick

Hollow brick

Hollow sand-lime brick

Hollow sand-lime brick

Hollow lightweight concrete block

Hollow lightweight concrete block

Solid concrete block

Solid concrete block

Approved surfaces

Applications

Anchoring glued in with reinforcing bars

Anchoring glued in with threaded rods

Substitutes

Services

Design Consulting

Design Consulting

Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

E-learning training

E-learning training

Learn more
Tool service 2

Tool service 2

Installation guide

Installation manual

Installation step by step

1

Unscrew the safety plug.

2

Put the mixing tip on the cartridge.

3

Place the cartridge in the dispenser.

4

Dispense to waste until even colour is obtained.

5

Fill with resin 70% of the depth of the hole, starting from the bottom of the hole.

Approvals and publications

Product card and catalogues

Choose product card:

Product card

Choose product catalog:

Specification Design Guide

General catalogue - PDF

Stay up to date

Sign up for our newsletter and don't miss:

Information

on our products and services

News

on the offering and latest promotions

Reports

on events, trade shows and industry conferences

© 2024 Koelner Rawlplug IP