Universal hammer-in facade fixing R-TFIX-8M 8x275 mm with metal nail - cardboard box - 100 pcs.
R-TFIX-8M-275
5906675269504
Define product parameters:
Contact with us and check out our terms of cooperation
R-TFIX-8M-275
5906675269504
Define product parameters:
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Insulation retaining plate R-KWL 140 mm, polyamide - cardboard box - 200 pcs.
18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.
Aggressor SDS Plus drill bits 8x400x460 mm - plastic hanger - 1 pc.
Dead blow hammer 0,6 kg - label - 1 pc.
Rebardrill SDS Plus drill bits 8x400x460 mm - plastic hanger - 1 pc.
R-TFIX-CAP Mineral wool cap 63x10 mm - cardboard box - 100 pcs.
R-TFIX-CAP Polystyrene cap EPS 63x10 mm, grey - cardboard box - 100 pcs.
Counterbore plastic cutter for EPS and mineral wool 63x10 mm - cardboard box - 1 pc.
R-TFIX-CAP Polystyrene cap EPS 63x10 mm, white - cardboard box - 100 pcs.
Brickdrill SDS PLUS non-impact drill bits 8.0x460 m - plastic hanger - 1 pc.
Insulation retaining plate R-KWL 90 mm, polyamide - cardboard box - 200 pcs.
Counterbore cutter for EPS and mineral wool 63x10 mm - cardboard box - 1 pc.
Versatile hammer-in facade fixing with steel nail recommended for ETICS.
R-TFIX-8M: countersunk installation in EPS (R-KFS-63/10)
R-TFIX-8M: montaż powierzchniowy w wełnie mineralnej
R-TFIX-8M: montaż powierzchniowy w styropianie
R-TFIX-8M: countersunk installation in EPS (R-KFS-63)
Montaż wbijanego kołka fasadowego R-TFIX-8M – instruktaż Rawlplug
R-TFIX-8M hammer-in facade fixing installation – Rawlplug tutorial
Concrete C12/15-C50/60 (Use category A)
External wall panel of concrete C16/20 – C50/60 (Use category A)
Solid brick (Use category B)
Solid sand-lime brick (Use category B)
Hollow brick (Use category C)
Vertically-perforated clay block (Use category C)
Hollow sand-lime brick (Use category C)
Hollow lightweight concrete block (Use category D)
Autoclaved aerated concrete (Use Category E)
Lightweight concrete block (Use category C)
Approved surfaces
Facades - thermal insulation systems
Drill a hole to the required diameter and depth for rebar size being used.
Clean drilled hole 3 times.
Insert the fixing into the drilled hole.
Drive the pin into the expansion sleeve until the pin, the pin plate and thermal insulation are aligned on one surface.
Correctly fastened R-TFIX-8M pin.
Facade fixings - general characteristics - E-LEARNING
Facade fixings - selection of products for the application - E-LEARNING
Facade thermal insulation fixings - Rawlplug's offer - ON-SITE TRAINING
R-TFIX-8M - Hammer-in Facade anchors - ON-SITE TRAINING
MBA - metal Hammer-in Facade anchors - ON-SITE TRAINING
Facade thermal insulation fixings - Rawlplug's offer - TRAINING CENTER
R-TFIX-8M - stud facade stud hammered - TRAINING CENTER
MBA - metal Hammer-in Facade anchors - TRAINING CENTER
Facade thermal insulation fixings - Rawlplug's offer - WEBINAR
R-TFIX-8M - Hammer-in Facade anchors - WEBINAR
MBA - metal Hammer-in Facade anchors - WEBINAR