1. Mainpage
  2. Insulation flange KCX 55 mm - cardboard box - 400 pcs.

Insulation flange KCX 55 mm - cardboard box - 400 pcs.

Universal

KCX-055

5906675078984

Insulation washer with integral cap suitable for attachment of insulation layers to wooden and sheet metal substrates.

Define product parameters:

Length
Packaging and quantity
Weight and bulk packaging
  • Unit pack

    400.00 pcs.3.86 kg

  • Bulk pack

    400.00 pcs.3.86 kg

  • Pallet

    22400.00 pcs.216.33 kg

Related products

Features

Insulation washer with integral cap suitable for attachment of insulation layers to wooden and sheet metal substrates.

  • Special design of integral fastener cap allows reduction of thermal bridges to 0,001W/K.
  • Can be used with additional KWL insulation holding plate, available in 90, 110 and 140 mm flange sizes (recommended for soft insulation materials such as mineral wool).
  • Consistent and reliable holding force.
  • Quick, simple and clean installation.
  • Design with long tube allows to use short length of the screw for best cost effective solution  to fix large insulation thickness.
  • Recommended for the attachment of ETICS to wooden substrates using UC screws, or to sheet metal using WB or WX screws ( allows setting without pre-drilling, thus saving a stage of installation).

Product video

Krok po kroku: jak montować talerze dociskowe

Substrates

Concrete

Concrete

Metal sheet & profiles

Metal sheet & profiles

Chipboard

Chipboard

Wood

Wood

Timber

Timber

Approved surfaces

Applications

Facades - thermal insulation systems

Substitutes

Services

Design Consulting

Design Consulting

Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

Technical Support 2

Technical Support 2

EasyFix

EasyFix

Installation guide

Installation manual

Installation step by step

1

Place the KCX plug into the thermal insulation layer and press until the plate is level with the thermal insulation surface.

2

Fasten the thermal insulation material through the pressure collar with an appropriate screw. Tighten the connector until the recommended anchoring depth is achieved.

3

Correctly installed KCX plug with WB or WX metal screw.

4

Place the KCX plug into the thermal insulation layer and press until the plate is level with the thermal insulation surface.

5

Fasten the thermal insulation material through the pressure collar with an appropriate screw. Tighten the connector until the recommended anchoring depth is achieved.

6

Correctly installed KCX dowel with UC wood screw.

Installation data

Approvals and publications

Technical library and approvals

Choose document:

KOT-2019/0968

020-UWB-0988/Z

KDWU-2019-0968-KCX

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

General catalogue - PDF

Stay up to date

Sign up for our newsletter and don't miss:

Information

on our products and services

News

on the offering and latest promotions

Reports

on events, trade shows and industry conferences

© 2025 Koelner Rawlplug IP