1. Mainpage
  2. Rigid extension for mechanical cleaning with SDS+ drive R-BRUSH-TC - plastic bag - 1 pc.

Rigid extension for mechanical cleaning with SDS+ drive R-BRUSH-TC - plastic bag - 1 pc.

Solid walls
New

R-BRUSH-EXT-H-SDS

5906675436111

Rigid extension with SDS+ for automatic cleaning of deep holes in a solid substrate

Define product parameters:

Packaging and quantity
Weight and bulk packaging
  • Unit Pack Quantity

    0.35

  • Bulk Pack Quantity

    7.199

  • Pallet Quantity

    503.93

Related products

Features

Rigid extension with SDS+ for automatic cleaning of deep holes in a solid substrate

  • Suitable for variable anchor embedment depths.
  • Ideal for serial cleaning of deep holes.
  • Suitable for repetitive and frequent use.
  • Hole cleaning is necessary for correct loads

Product video

Jak prawidłowo wykonać głębokie wklejanie prętów zbrojeniowych?

Rawlplug Deep Anchorage and post-installed rebar accessories system

Substrates

Concrete C12/15-C50/60

Concrete C12/15-C50/60

Approved surfaces

Applications

Anchoring glued in with reinforcing bars

Anchoring glued in with threaded rods

Concrete structures

Drilling

Reinforcement of a large slab

Substitutes

Services

E-learning training

E-learning training

Learn more
Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

Technical Support 2

Technical Support 2

Rawlplug Academy

Rawlplug Academy

Installation guide

Installation manual

Installation step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.

3

Choose extensions and brushes to the selected depth and diameter of the hole, then combine them into one set.

4

Connect the drill set with the SDS tip.

5

Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.

Approvals and publications

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

General catalogue - PDF