1. Mainpage
  2. Products
  3. Fixings
  4. Frame fixings
  5. Frame Fxings With Long Expansion Zone R-FF1
  6. Frame Fixings without Collar R-FF1-L
  7. Nylon frame fixing counersunk, zinc flake R-FF1-N-L-DT 10x100 mm - cardboard box - 25 pcs.

Nylon frame fixing counersunk, zinc flake R-FF1-N-L-DT 10x100 mm - cardboard box - 25 pcs.

Universal

R-FF1-N-10L100/DT

5906675039022

Universal countersunk frame fixing with screw, zinc flake

Define product parameters:

Diameter
Length
Corrosion protection
Packaging and quantity
Weight and bulk packaging
  • Unit pack

    25.00 pcs.0.84 kg

  • Bulk pack

    400.00 pcs.13.89 kg

  • Pallet

    9600.00 pcs.333.46 kg

Features

Universal countersunk frame fixing with screw, zinc flake

  • Special zinc flake corrosion-resistant coating for anti-corrosion protection.
  • Specially-formulated nylon allows best performance installation for use in all base material categories according to ETAG 020 (A, B, C, D).
  • Internal plug geometry designed to fit the screw head.
  • Plug design ensures multi-axis expansion.
  • The countersunk plug for flush fixing of soft material (eg. timber).

Product video

rawlplug_ff1_universal

Substrates

Cracked concrete ≥ C12/15 (Use category A)

Cracked concrete ≥ C12/15 (Use category A)

Concrete ≥ C12/15 (Use category A)

Concrete ≥ C12/15 (Use category A)

Solid brick (B)

Solid brick (B)

Solid sand-lime brick (B)

Solid sand-lime brick (B)

Hollow sand-lime brick (C)

Hollow sand-lime brick (C)

Hollow lightweight concrete block (D)

Hollow lightweight concrete block (D)

Aerated concrete block (D)

Aerated concrete block (D)

Hollow brick (C)

Hollow brick (C)

Approved surfaces

Applications

Bathroom accessories

Doors and windows

Electrical Installations

Furniture

Handrails

Satellite dishes

Ventilated facades

Full list of variations

Substitutes

Services

Installation guide

Installation manual

Installation step by step

1

Drill a hole of appropriate diameter and depth (drawing 1 - base material A, B, C, D)

2

Use a punch tool for making the hole.

3

Blow out the dust at least 4 times with the hand pump.

4

With a hammer, lightly tap the plug through the fixture into hole until fixing depth is reached.

5

Tighten the FF1 screw.

6

Properly fixed frame pin with screw.

7

Tighten the FF1

Installation data
Design data
SizeFF1-08PPFF1-08PAFF1-10PPFF1-10PAFF1-14PPFF1-14PA
Screw diameterd[mm]
5,85,87710,810,8
Fixing diameterd[mm]
7,87,89,89,813,813,8
Hole diameter in substrated0[mm]
8810101414
Mounting socketTX[-]
TX 30TX 30TX 40TX 40TX 50TX 50
REDUCED EMBEDMENT DEPTH
Min. hole depth in substrateh0[mm]
60606060--
Min. installation depthhnom[mm]
50505050--
STANDARD EMBEDMENT DEPTH
Min. hole depth in substrateh0[mm]
808080808080
Min. installation depthhnom[mm]
707070707070
SizeFF1-08PPFF1-08PAFF1-10PPFF1-10PAFF1-14PPFF1-14PA
Concrete and masonry substrates
REDUCED EMBEDMENT DEPTH
Installation torqueTinst[Nm]
797,416--
STANDARD EMBEDMENT DEPTH
Installation torqueTinst[Nm]
--16161530
AAC substrates
MINIMUM EMBEDMENT DEPTH
Installation torqueTinst[Nm]
797,4/16161530
STANDARD EMBEDMENT DEPTH
Installation torqueTinst[Nm]
3,53,63,84,35,56,6
SizeFF1-08PPFF1-08PAFF1-10PPFF1-10PAFF1-14PPFF1-14PA
Concrete substrates
Min. substrate thicknesshmin[mm]
100100100100100100
Min. edge distancecmin[mm]
6060608080120
Min. spacingsmin[mm]
6060609075120
Perforated masonry substrates
Min. substrate thicknesshmin[mm]
113113113113113113
Min. edge distancecmin[mm]
6060100100100120
Min. spacingsmin[mm]
120120200100200240
AAC substrates
Min. substrate thicknesshmin[mm]
100100100100100100
Min. edge distancecmin[mm]
1001007070100100
Min. spacingsmin[mm]
2002008080200200
SizeFF1-08PP/PAFF1-10PP/PAFF1-14PP/PA
Nominal embedment depthhnom[mm]
50507070
CHARACTERISTIC RESISTANCE
TENSION LOAD NRk
Concrete C 12/15 according to EN 206-1[kN]
0,6/1,50,5/1,20,9/6,02,0/4,0
Concrete C 16/20 – C 50/60 according to EN 206-1[kN]
0,9/2,00,9/2,01,2/8,52,5/5,5
SHEAR LOAD VRk
Concrete C 12/15 according to EN 206-1[kN]
57,47,419,7
Concrete C 16/20 – C 50/60 according to EN 206-1[kN]
57,47,419,7
DESIGN RESISTANCE
TENSION LOAD NRd
Concrete C 12/15 according to EN 206-1[kN]
0,33/0,830,27/0,660,5/3,331,1/2,2
Concrete C 16/20 – C 50/60 according to EN 206-1[kN]
0,5/1,10,5/1,10,66/4,721,38/3,05
SHEAR LOAD VRd
Concrete C 12/15 according to EN 206-1[kN]
3,65,35,314,2
Concrete C 16/20 – C 50/60 according to EN 206-1[kN]
3,65,35,314,2
RECOMMENDED LOAD
TENSION LOAD NRd
Concrete C 12/15 according to EN 206-1[kN]
0,21/0,590,19/0,470,35/2,370,78/1,57
Concrete C 16/20 – C 50/60 according to EN 206-1[kN]
03,5/0,7803,5/0,780,47/4,510,98/2,17
SHEAR LOAD VRd
Concrete C 12/15 according to EN 206-1[kN]
2,53,73,710,1
Concrete C 16/20 – C 50/60 according to EN 206-1[kN]
2,53,73,710,1
SizeFF1-08PP/PAFF1-10PP/PAFF1-14PP/PA
Nominal embedment depthhnom[mm]
5070507070
CHARACTERISTIC RESISTANCE
TENSION AND SHEAR LOAD FRk
Solid clay bricks according to EN 771-1 ≥ 20MPa[kN]
1,2/1,5---4,0/4,5
Solid clay bricks according to EN 771-1 ≥ 50MPa[kN]
--1,5/ -2,5/5,0-
Solid sand-lime bricks according to EN 771-2 ≥ 20MPa[kN]
0,75/1,5---3,0/3,5
Solid sand-lime bricks according to EN 771-2 ≥ 30MPa[kN]
--1,2/1,5--
Hollow clay bricks according to EN 771-1 ≥ 7,5MPa[kN]
---0,3/0,5-
Hollow clay bricks according to EN 771-1 ≥ 12MPa[kN]
0,4/0,6--0,5/0,61,5/0,9
Hollow clay bricks according to EN 771-1 ≥ 15MPa[kN]
0,5/0,75--0,5/1,50,9/1,2
Hollow calcium bricks according to EN 771-2 ≥ 20MPa[kN]
0,4/0,5--0,75/2,50,9/1,2
Lightweight concrete hollow blocks Hbl according to EN 771-2[kN]
0,5/0,9--0,3/0,751,2/1,2
Autoclaved aerated concrete AAC 2 according to EN 771-4[kN]
-0,5/0,4-0,5/0,40,75/0,6
Autoclaved aerated concrete AAC 6 according to EN 771-4[kN]
-1,2/0,9-1,2/1,22,5/1,5
DESIGN RESISTANCE
TENSION AND SHEAR LOAD FRd
Solid clay bricks according to EN 771-1 ≥ 20MPa[kN]
0,48/0,6---1,6/1,8
Solid clay bricks according to EN 771-1 ≥ 50MPa[kN]
--0,6/ -1,0/2,0-
Solid sand-lime bricks according to EN 771-2 ≥ 20MPa[kN]
0,3/0,6---1,2/1,4
Solid sand-lime bricks according to EN 771-2 ≥ 30MPa[kN]
--0,48/0,6--
Hollow clay bricks according to EN 771-1 ≥ 7,5MPa[kN]
---0,12/0,2-
Hollow clay bricks according to EN 771-1 ≥ 12MPa[kN]
0,16/0,24--0,2/0,240,6/0,36
Hollow clay bricks according to EN 771-1 ≥ 15MPa[kN]
0,2/0,3--0,2/0,60,36/0,48
Hollow calcium bricks according to EN 771-2 ≥ 20MPa[kN]
0,16/0,2--0,3/1,00,36/0,48
Lightweight concrete hollow blocks Hbl according to EN 771-2[kN]
0,2/0,36--0,12/0,30,48/0,48
Autoclaved aerated concrete AAC 2 according to EN 771-4[kN]
-0,25/0,2-0,25/0,20,37/0,3
Autoclaved aerated concrete AAC 6 according to EN 771-4[kN]
-0,6/0,45-0,6/0,61,25/0,75
RECOMMENDED LOAD
TENSION AND SHEAR LOAD FRd
Solid clay bricks according to EN 771-1 ≥ 20MPa[kN]
0,34/0,42---1,14/1,28
Solid clay bricks according to EN 771-1 ≥ 50MPa[kN]
--0,42/ -0,71/1,42-
Solid sand-lime bricks according to EN 771-2 ≥ 20MPa[kN]
0,21/0,42---0,85/1,0
Solid sand-lime bricks according to EN 771-2 ≥ 30MPa[kN]
--0,34/0,42--
Hollow clay bricks according to EN 771-1 ≥ 7,5MPa[kN]
---0,08/0,14-
Hollow clay bricks according to EN 771-1 ≥ 12MPa[kN]
0,11/0,17--0,14/0,170,42/0,25
Hollow clay bricks according to EN 771-1 ≥ 15MPa[kN]
0,14/0,21--0,14/0,420,25/0,34
Hollow calcium bricks according to EN 771-2 ≥ 20MPa[kN]
0,11/0,14--0,21/0,710,25/0,34
Lightweight concrete hollow blocks Hbl according to EN 771-2[kN]
0,14/0,25--0,08/0,210,34/0,34
Autoclaved aerated concrete AAC 2 according to EN 771-4[kN]
-0,17/0,14-0,17/0,140,26/0,21
Autoclaved aerated concrete AAC 6 according to EN 771-4[kN]
-0,42/0,32-0,42/0,420,89/0,53

Approvals and publications

Technical library

(4)

Technical assessments(2)

ETA-12-0398-R-FF1-04-09-2024

ETA-12/0398

UKTA-0836-22/6344

UKTA-0836-22/6344

Declarations(1)

UKTA-DoP-22/6344-R-FF1

Certificates(1)

1488-CPR-0527/Z

CPR

Catalogues and product cards

(6)

Product cards(3)

Product card

Product card

Product card

Catalogues(3)

Catalogue Offer (overview) - EN

Specification Design Guide

General Catalogue EN 2026/27

Stay up to date

Sign up for our newsletter and don't miss:

Information

on our products and services

News

on the offering and latest promotions

Reports

on events, trade shows and industry conferences

© 2026 Koelner Rawlplug IP