Manual gun for bonded anchor resin in cartridges 175-310ml - label - 1 pc.
R-GUN-300-N
5906675280141
Professional manual gun for bonded anchors.
Define product parameters:
Contact with us and check out our terms of cooperation
R-GUN-300-N
5906675280141
Professional manual gun for bonded anchors.
Define product parameters:
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Polyester bonded anchor R-KEM-II standard - plastic cartouche - 300 ml
Polyester bonded anchor R-KEM-II standard, grey - plastic cartouche - 300 ml
Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml
Polyester bonded anchor R-KEM-II standard, stone - plastic cartouche - 300 ml
Polyester bonded anchor R-KEM-II standard, ES label - plastic cartouche - 300 ml
Hybrid bonded anchor R-KER-II standard, FR label - plastic cartouche - 300 ml
Polyester bonded anchor R-KEM-II standard - plastic cartouche - 175 ml
Polyester bonded anchor R-KEM-II winter version - plastic cartouche - 300 ml
Hybrid bonded anchor R-KER-II winter version - plastic cartouche - 300 ml
Hybrid bonded anchor R-KER-II summer version - plastic cartouche - 300 ml
Polyester bonded anchor R-KEM-II standard, SV label - plastic cartouche - 300 ml
R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.
Professional manual gun for bonded anchors.
Cracked concrete
Non-cracked concrete
Hollow-core slab
Solid concrete block
Solid brick
Solid sand-lime brick
Hollow lightweight concrete block
Hollow brick
Hollow sand-lime brick
Approved surfaces
Anchoring glued in with threaded rods
Anchoring glued in with reinforcing bars
Manual gun for bonded anchor resin in cartridges 175-310ml with handle - plastic bag - 1 pc.
Manual gun for cartridges: 385/600ml(3:1), 280/300/310ml, 380-410ml (10:1), 4.5kN - cardboard box - 1 pc.
Design Consulting
Technical Support 2
Training at the Rawlplug Academy center
Traditional training
Unscrew the safety plug.
Put the mixing tip on the cartridge.
Place the cartridge in the dispenser.
Dispense to waste until even colour is obtained.
Fill with resin 70% of the depth of the hole, starting from the bottom of the hole.