R-MBA-08090
5906675521084
Define product parameters:
Unit pack
250.00 pcs.3.79 kg
Bulk pack
250.00 pcs.3.79 kg
Pallet
15750.00 pcs.238.52 kg
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Fire-resistant metal insulation fixing
Approved surfaces
Drill hole to the required diameter and depth for rebar size being usee
Blow out dust at least 3 times with a hand pump.
Gently drive the steel dowel into the hole until the correct anchorage depth for the fastener is achieved. For soft substrates, use the MKC 85 mm steel washer.
Correctly installed steel facade fixing.
Cut the hole in insulation board.
Drill a hole of appropriate diameter and depth.
Clean drilled hole 3 times.
Gently drive the steel dowel into the hole until the correct anchorage depth for the fastener is achieved. For soft substrates, use the MKC 85 mm steel washer.
Insert cap into countersunk hole in insulation board following installation of the facade fixing.
Correctly installed steel facade fixing.
(3)
(4)
