FERC logos
  1. Mainpage
  2. R-MBA Metal insulation fixing 8x90mm, stainless steel - cardboard box - 250 pcs.

R-MBA Metal insulation fixing 8x90mm, stainless steel - cardboard box - 250 pcs.

Universal
New

R-MBA-SS-08090

5906675561165

Fire-resistant metal insulation fixing

Define product parameters:

Length
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    250.00 pcs.

  • Bulk pack

    250.00 pcs.

  • Pallet

    15750.00 pcs.

Related products

Rawlplug SDS Plus Rebar Drill Bit 8.0 x 200 x 260mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

MKC Retaining Metal Flanges For MBA Fixings - cardboard box - 250 pcs.

Metal washer for use in combination with metal facade fixings from MBA range

Brickdrill SDS PLUS non-impact drill bits 8.0x260 m - plastic hanger - 1 pc.

Drill bits for non-impact drilling in ceramic materials

Rawlplug SDS Plus Rebar Drill Bit 8.0 x 100 x 160mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Aggressor SDS Plus drill bits 8x150x210 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Aggressor SDS Plus drill bits 8x200x260 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Dead blow hammer 0,6 kg - label - 1 pc.

Hammer with a special system that absorbs the impact energy

18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

Counterbore cutter for EPS and mineral wool 90x20 mm - cardboard box - 1 pc.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

MKC-SS Stainless Steel Retaining Metal Flanges For MBASS Fixings - cardboard box - 250 pcs.

Metal washer for use in combination with metal facade fixings from MBA range

Fireproof gun foam - metal can - 750 ml

B1 – Fire resistant , low-pressure, one-component polyurethane foam with a gun applicator

Rawlplug SDS Plus Rebar Drill Bit 8.0 x 200 x 260mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

MKC Retaining Metal Flanges For MBA Fixings - cardboard box - 250 pcs.

Metal washer for use in combination with metal facade fixings from MBA range

Brickdrill SDS PLUS non-impact drill bits 8.0x260 m - plastic hanger - 1 pc.

Drill bits for non-impact drilling in ceramic materials

Rawlplug SDS Plus Rebar Drill Bit 8.0 x 100 x 160mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Aggressor SDS Plus drill bits 8x150x210 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Aggressor SDS Plus drill bits 8x200x260 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Dead blow hammer 0,6 kg - label - 1 pc.

Hammer with a special system that absorbs the impact energy

18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

Counterbore cutter for EPS and mineral wool 90x20 mm - cardboard box - 1 pc.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

MKC-SS Stainless Steel Retaining Metal Flanges For MBASS Fixings - cardboard box - 250 pcs.

Metal washer for use in combination with metal facade fixings from MBA range

Fireproof gun foam - metal can - 750 ml

B1 – Fire resistant , low-pressure, one-component polyurethane foam with a gun applicator

Features

Fire-resistant metal insulation fixing

  • Metal facade fixing, recommended for use when fire resistance (F120) is a requirement.
  • Fast and simple hammer-set installation reduces working times.
  • Accessory spreader plate, MKC-SS (85mm diameter) also available for installation of soft insulation materials such as mineral wool.
  • Extensive dimensional range allows anchorage of insulation boards up to 250mm thick.
  • Made of high quality stainless steel to increase resistance to damage.
  • For countersunk installation, we recommend using the R-KFS-90/20 cutter and the R-TFIX-CAP90-MW mineral wool cup.

Product video

R-MBA: montaż zagłębiony w wełnie mineralnej

R-MBA: montaż powierzchniowy w wełnie mineralnej

Krok po kroku: jak montować metalowe kołki fasadowe?

Substrates

Concrete C20/25-C50/60 (Use category A)

Concrete C20/25-C50/60 (Use category A)

Solid brick (Use category B)

Solid brick (Use category B)

Solid sand-lime brick (Use category B)

Solid sand-lime brick (Use category B)

Ceramic hollow block

Ceramic hollow block

Hollow sand-lime brick ≥ 15MPa

Hollow sand-lime brick ≥ 15MPa

Aerated concrete

Aerated concrete

Approved surfaces

Applications

Facades - thermal insulation systems

Substitutes

MBASS Metal Insulation Fixing 8 x 90mm, Stainless Steel, Class A1 Fire Rating - cardboard box - 250 pcs.

Fire-resistant metal insulation fixing

Metal insulation fixing R-MBA 8x90 mm - cardboard box - 250 pcs.

Fire-resistant metal insulation fixing

MBASS Metal Insulation Fixing 8 x 90mm, Stainless Steel, Class A1 Fire Rating - cardboard box - 250 pcs.

Fire-resistant metal insulation fixing

Metal insulation fixing R-MBA 8x90 mm - cardboard box - 250 pcs.

Fire-resistant metal insulation fixing

Services

Design Consulting

Design Consulting

E-learning training

E-learning training

Learn more
Technical Support 2

Technical Support 2

Rawlplug Academy

Rawlplug Academy

Installation guide

Installation manual

Installation step by step

1

Drill hole to the required diameter and depth for rebar size being usee

2

Blow out dust at least 3 times with a hand pump.

3

Gently drive the steel dowel into the hole until the correct anchorage depth for the fastener is achieved. For soft substrates, use the MKC 85 mm steel washer.

4

Correctly installed steel facade fixing.

5

Cut the hole in insulation board.

6

Drill a hole of appropriate diameter and depth.

7

Clean drilled hole 3 times.

8

Gently drive the steel dowel into the hole until the correct anchorage depth for the fastener is achieved. For soft substrates, use the MKC 85 mm steel washer.

9

Insert cap into countersunk hole in insulation board following installation of the facade fixing.

10

Correctly installed steel facade fixing.

Installation data

Approvals and publications

Technical library and approvals

Choose document:

ITB-KOT-2018/0721-6

020-UWB-0702/Z

KDWU-2018-0721-6-R-MBA

Product card and catalogues

Choose product card:

Technical card R-MBA

Choose product catalog:

Specification Design Guide

General catalogue - PDF