R-TFIX-TOOL-GREY
5906675412269
TX40 Setting tool with integrated disc for surface installation of screw-in fixing R-TFIX-8SX, setting the flange flush with the surface of the insulation
Define product parameters:
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
TX40 Setting tool with integrated disc for surface installation of screw-in fixing R-TFIX-8SX, setting the flange flush with the surface of the insulation
R-TFIX-8S-X: surface installation in EPS (R-TFIX-TOOL-GREY)
Approved surfaces
Design Consulting
Training at the Rawlplug Academy center
Technical Support 2
Rawlplug Academy
Drill a hole to the required diameter and depth for rebar size being used.
Clean drilled hole 3 times.
Insert R-TFIX-TOOL-GRY into recess in head moulding of R-TFIX-8S-X screw.
Steadily drive in the screw with high revs until fixing is secure (when disc touches insulation surface).
Tighten the plug screw until the appropriate embedding depth is reached (the plate should be on the surface with a thermal insulation layer).
After fixing the connector, close the hole with the R-TFIX-CAP15 EPS cap.
Pin is correctly fastened.
