FERC logos
  1. Mainpage
  2. Brass anchors with internal thread TM M10 mm - cardboard box - 50 pcs.

Solid walls

R-TM-10/50

5906675141787

Rawlplug

Brass anchor for medium loads suitable for all blots and studs with a metric thread

Define product parameters:

Metric diameter
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    50.00 pcs.0.55 kg

  • Bulk pack

    800.00 pcs.9.09 kg

  • Pallet

    44800.00 pcs.509.15 kg

Features

Brass anchor for medium loads suitable for all blots and studs with a metric thread

  • Special surface structure prevents from rotating in the hole.
  • The internal thread allows for the use of standard metric screws or threaded rods, and for surface flush removal and reuse of the fixing point. This provides great flexibility.
  • Fixing allows the attached item to be reusable.
  • Suitable for pre-positioned and push-through installation.
  • Low installation depth reduces amount of drilling.

Non-cracked concrete

Non-cracked concrete

High-density natural stone

High-density natural stone

Solid brick

Solid brick

Concrete slab

Concrete slab

Concrete

Concrete

Approved surfaces

Bathroom accessories

Cabinets, brackets and wall brackets

Curtain rods

Electrical Installations

Handrails

Metric diameter
Packaging and quantity
Index
EAN
Catalog price for pack. net

R-DCA Drop-In Anchor M10 x 40mm - cardboard box - 50 pcs.

Stainless wedge anchor with internal thread R-DCA-A4 M10 mm - cardboard box - 50 pcs.

R-DCL Lipped Drop-In Anchor M10 x 40mm - cardboard box - 50 pcs.

Galvanized wedge anchor with internal thread and collar R-DCL M10x25 mm - cardboard box - 50 pcs.

R-DCA Drop-In Anchor M10 x 40mm - cardboard box - 50 pcs.

Stainless wedge anchor with internal thread R-DCA-A4 M10 mm - cardboard box - 50 pcs.

R-DCL Lipped Drop-In Anchor M10 x 40mm - cardboard box - 50 pcs.

Galvanized wedge anchor with internal thread and collar R-DCL M10x25 mm - cardboard box - 50 pcs.

Installation manual

Installation step by step

1

Drill the hole and clean it up.

2

Blow out dust at least 4 times with a hand pump.

3

Insert the anchor into the hole and hammer it in until it is flush with the substrate.

4

Place the element to be fastened, insert the screw or threaded rod and tighten to the required torque.

Installation data

Catalogues and product cards

(3)

Catalogues(3)

Catalogue Offer (overview) - EN

Download

Specification Design Guide

Download

General Catalogue EN 2026/27

Download