1. Mainpage
  2. Hammer-in facade fixing with plastic pin TFIX-8P 135 mm - cardboard box - 200 pcs.

Hammer-in facade fixing with plastic pin TFIX-8P 135 mm - cardboard box - 200 pcs.

Universal

TFIX-8P-135

5906675087818

Universal hammer-in facade fixing with a plastic pin recommended for ETICS thermal insulation systems

Define product parameters:

Length
Packaging and quantity

Related products

Features

Universal hammer-in facade fixing with a plastic pin recommended for ETICS thermal insulation systems

  • Unique nylon pin design reinforced with glass fibre allows fast and trouble-free installation with correct expansion of the plug.
  • The plastic nail reduces heat transmission (value 0.0 W/K).
  • Installation in all base materials (categories A,B,C,D,E)
  • Expansion zone designed for low embedment depths, reducing the amount of drilling required.
  • Can be used with additional KWL insulation holding plate, available in 90, 110 and 140 mm flange sizes (recommended for soft insulation materials such as mineral wool).

Product video

Rawlplug TFIX-8P Facade Fixing with Plastic Pin

Substrates

Concrete C12/15-C50/60 (Use category A)

Concrete C12/15-C50/60 (Use category A)

External wall panel of concrete C16/20 – C50/60 (Use category A)

External wall panel of concrete C16/20 – C50/60 (Use category A)

Solid brick (Use category B)

Solid brick (Use category B)

Solid sand-lime brick (Use category B)

Solid sand-lime brick (Use category B)

Hollow brick (Use category C)

Hollow brick (Use category C)

Vertically-perforated clay block (Use category C)

Vertically-perforated clay block (Use category C)

Hollow sand-lime brick (Use category C)

Hollow sand-lime brick (Use category C)

Lightweight concrete block (Use category C)

Lightweight concrete block (Use category C)

Hollow lightweight concrete block (Use category D)

Hollow lightweight concrete block (Use category D)

Aerated concrete block (Use category D)

Aerated concrete block (Use category D)

Approved surfaces

Applications

Facades - thermal insulation systems

Plinths and finishing profiles

Substitutes

Services

Technical Support 2

Technical Support 2

Rawlplug Academy

Rawlplug Academy

Designing

Designing

Installation guide

Installation manual

Installation step by step

1

Drill a hole of required diameter and depth.

2

Clean the hole.

3

Bottom side of the plate must be flush with the ETICS.

4

Lightly tap the plastic nail into the plastic sleeve until fixing is secure and flush with insulation material.

5

In soft insulation panels the fixing should be combined with insulation retaining plates KWL diameter 90, 110, 140 mm.

Installation data

Approvals and publications

Technical library and approvals

Choose document:

ETA-13/0845

1488-CPR-0559/Z

DoP-13/0845 TFIX-8P

UKTA-22/6340

UKTA-DoP-22/6340-TFIX-8P

Product card and catalogues

Choose product catalog:

Specification Design Guide

General catalogue - PDF

Rawlplug Academy

Facade fixings - general characteristics - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Facade fixings - selection of products for the application - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Facade thermal insulation fixings - Rawlplug's offer - ON-SITE TRAINING

Facade connectors - key parameters and assembly.

R-TFIX-8M - Hammer-in Facade anchors - ON-SITE TRAINING

You will learn what Rawlplug's R-TFIX-8M Rawlplug facade dowels are and what they are used for. You will understand their advantages and features determining the application. You will test the assembly yourself, learning about the installation risks.

MBA - metal Hammer-in Facade anchors - ON-SITE TRAINING

If you need to install wool using a non-flammable and certified product, this training is for you! You will learn the requirements and benefits of steel wool pins and the principles of their correct installation and strength tests.

Facade thermal insulation fixings - Rawlplug's offer - TRAINING CENTER

Facade connectors - key parameters and assembly.

R-TFIX-8M - stud facade stud hammered - TRAINING CENTER

You will learn what Rawlplug's R-TFIX-8M Rawlplug facade dowels are and what they are used for. You will understand their advantages and features determining the application. You will test the assembly yourself, learning about the installation risks.

MBA - metal Hammer-in Facade anchors - TRAINING CENTER

If you need to install wool using a non-flammable and certified product, this training is for you! You will learn the requirements and benefits of steel wool pins and the principles of their correct installation and strength tests.

Facade thermal insulation fixings - Rawlplug's offer - WEBINAR

Facade connectors - key parameters and assembly.

R-TFIX-8M - Hammer-in Facade anchors - WEBINAR

You will learn what Rawlplug's R-TFIX-8M Rawlplug facade dowels are and what they are used for. You will understand their advantages and features determining the application. You will test the assembly yourself, learning about the installation risks.

MBA - metal Hammer-in Facade anchors - WEBINAR

If you need to install wool using a non-flammable and certified product, this training is for you! You will learn the requirements and benefits of steel wool pins and the principles of their correct installation and strength tests.

Stay up to date

Sign up for our newsletter and don't miss:

Information

on our products and services

News

on the offering and latest promotions

Reports

on events, trade shows and industry conferences

© 2024 Koelner Rawlplug IP