1. Mainpage
  2. Products
  3. Fixings
  4. Facade Fixings
  5. Accessories for Styrofoam Pins
  6. Insulation Caps
  7. Polystyrene cap KES - 63x20 mm white - paper box - 250 pcs.

Polystyrene cap KES - 63x20 mm white - paper box - 250 pcs.

Universal

KES-63/20

5906675422879

Post-installed polystyrene cap reduces heat transmission and results in a homogenous insulation surface

Define product parameters:

Product material
Diameter
Packaging and quantity

Catalog price for bx:

PLN58.18

net | VAT 23%

Contact with us and check out our terms of cooperation

Related products

Counterbore plastic cutter for EPS and mineral wool 63x20 mm - paper box - 1 pcs.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

KI-10M hammer-in facade fixing with metal pin 10x90 mm - paper box - 250 pcs.

Hammer-in facade fixing with steel nail for countersunk installation with additional insulation cap

KI-10M hammer-in facade fixing with metal pin 10x260 mm - paper box - 200 pcs.

Hammer-in facade fixing with steel nail for countersunk installation with additional insulation cap

KI-10M Hammer-in facade fixing with metal pin 10x220 mm - paper box - 250 pcs.

Hammer-in facade fixing with steel nail for countersunk installation with additional insulation cap

KI-10M hammer-in facade fixing with metal pin 10x200 mm - paper box - 250 pcs.

Hammer-in facade fixing with steel nail for countersunk installation with additional insulation cap

KI-10M Hammer-in facade fixing with metal pin 10x180 mm - paper box - 250 pcs.

Hammer-in facade fixing with steel nail for countersunk installation with additional insulation cap

KI-10M Hammer-in facade fixing with metal pin 10x160 mm - paper box - 250 pcs.

Hammer-in facade fixing with steel nail for countersunk installation with additional insulation cap

KI-10M Hammer-in facade fixing with metal pin 10x140 mm - paper box - 250 pcs.

Hammer-in facade fixing with steel nail for countersunk installation with additional insulation cap

KI-10M hammer-in facade fixing with metal pin 10x120 mm - paper box - 250 pcs.

Hammer-in facade fixing with steel nail for countersunk installation with additional insulation cap

KI-10NS Screw in insulation fixing with long expansion zone 10x160 mm - paper box - 250 pcs.

Screw-in facade fixing with long expansion zone 60 mm for high performance in all base materials

KI-10NS Screw in insulation fixing with long expansion zone 10x140 mm - paper box - 250 pcs.

Screw-in facade fixing with long expansion zone 60 mm for high performance in all base materials

KI-10N Long expansion zone hammer-in facade fixing with metal pin 10x260 mm - paper box - 200 pcs.

Hammer-in facade fixing long expansion zone 60 mm for high performance in masonry, as well as lightweight and aerated concrete

Product info

Post-installed polystyrene cap reduces heat transmission and results in a homogenous insulation surface

  • Post-installed cap reduces heat transmission at fixing points
  • Results in homogeneous and smooth insulation surface
  • Cost-saving solution, as countersunk installation allows selection of shorter fixings.

Surface:

Mineral wool boards

Mineral wool boards

Polystyrene (EPS) boards

Polystyrene (EPS) boards

Approved surfaces

Usage:

Facades - thermal insulation systems

Ventilated facades

Substitutes

Product files

Assembly manual

Assembly step by step

1

Wyciąć otwór w wełnie mineralnej za pomocą frezu KFS

2

KI_10M_concrete_wool_inst_draw_02

3

KI_10M_concrete_wool_inst_draw_05

4

KI_10M_concrete_wool_inst_draw_06

5

KI_10M_concrete_wool_inst_draw_07

6

Cut the hole in insulation board.

7

Drill a hole of appropriate diameter and depth.

8

Hammer the steel nail into the plastic sleeve until fixing is secure and flush with insulation material. Embedment depth of min 25 mm in base materials category A, B, C (concrete, solid and perforated bricks), 40 mm in base materials category D (lightweight concrete blocks) and 60 mm in aerated concrete.

9

Insert cap into countersunk hole in insulation board following installation of the facade fixing.

10

Proper recessed installation.

Installation data

Files to download

Technical library and approvals

Choose document:

ETA-17/0161

DoP-17/0161 R-TFIX-8SX

1488-CPR-0544/Z

ETA-17/0592

1488-CPR-0545/Z

DoP-17/0592-R-TFIX-8M

Downloadable documents and publications

Choose product card:

Product cart

Product cart

Choose product catalog:

Catalogue

Rawlplug Academy