1. Mainpage
  2. Products
  3. Fixings
  4. Facade Fixings
  5. Screw-In Sticks for Styrofoam
  6. KI-10NS Screw in insulation fixing with long expansion zone 10x140 mm - paper box - 250 pcs.

KI-10NS Screw in insulation fixing with long expansion zone 10x140 mm - paper box - 250 pcs.

Universal

KI-140NS

5906675216140

Screw-in facade fixing with long expansion zone 60 mm for high performance in all base materials

Define product parameters:

Length
Packaging and quantity

Catalog price for bx:

PLN614.28

net | VAT 23%

Contact with us and check out our terms of cooperation

Related products

Aggressor SDS Plus drill bits 8x200x260 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Rebardrill SDS Plus drill bits 8x200x260 mm - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Rebardrill SDS Plus drill bits 8x150x210 mm - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Counterbore plastic cutter for EPS and mineral wool 63x20 mm - paper box - 1 pcs.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

600g dead blow hammer - label - 1 pc.

Hammer with a special system that absorbs the impact energy

18V 2.0J 20mm Cordless rotary hammer drill, Set with R-RC Rawlcase, 2 batteries 5.0Ah and 6,5 A charger - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

R-KWL Insulation retaining plate 90 mm, PA - paper box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

R-KWL Insulation retaining plate 140 mm, PA - paper box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

KWL Insulation retaining PP plate 90 mm - paper box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

Mineral wool cap KES - 90x20 mm - paper box - 250 pcs.

Post-installed polystyrene cap reduces heat transmission and results in a homogenous insulation surface

Mineral wool cap KES - 63x20 mm - paper box - 250 pcs.

Post-installed polystyrene cap reduces heat transmission and results in a homogenous insulation surface

Polystyrene cap KES - 63x20 mm white - paper box - 250 pcs.

Post-installed polystyrene cap reduces heat transmission and results in a homogenous insulation surface

Product info

Screw-in facade fixing with long expansion zone 60 mm for high performance in all base materials

  • Quick and easy installation in all substrates
  • Approved for use in all base material categories A,B,C,D,E
  • Steel nail allows fast and trouble-free installation with correct expansion of the plug.
  • Reduction of thermal bridge formation (value 0.3W/K) through the integration of an impact-resistant plastic overmoulding on the screw head.
  • Plate stiffness (value 0.6 kN/mm) ensures smooth elevation surface and stable insulation system.
  • Can be used with additional KWL insulation holding plate, available in 90, 110 and 140 mm flange sizes (recommended for soft insulation materials such as mineral wool).

Surface:

Cracked concrete ≥ C12/15 (Use category A)

Cracked concrete ≥ C12/15 (Use category A)

Solid Brick (Use category B)

Solid Brick (Use category B)

Vertically-perforated clay block (Use category C)

Vertically-perforated clay block (Use category C)

Reinforced components of lightweight aggregate concrete (Use category D)

Reinforced components of lightweight aggregate concrete (Use category D)

Aerated Concrete Block (Use category D)

Aerated Concrete Block (Use category D)

Hollow Brick (Use category C)

Hollow Brick (Use category C)

Approved surfaces

Usage:

Facades - thermal insulation systems

Substitutes

Product files

Assembly manual

Assembly step by step

1

Drill hole to the required diameter and depth for stud size being used. Drilling depth of min 60 mm in concrete and 80 mm in other approved materials.

2

Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached.

3

Tighten screw until fixing is secure and flush with insulation material. Embedment depth of min 40 mm in concrete and 60 mm in other approved materials.

4

In soft insulation panels the fixing should be combined with insulation retaining plates KWL 90, 110, 140 mm.

Installation data

Files to download

Downloadable documents and publications

Choose product catalog:

Catalogue

Rawlplug Academy