1. Mainpage
  2. Products
  3. Fixings
  4. Facade Fixings
  5. Screw-In Sticks for Styrofoam
  6. Universal facade fixing with plain screw R-TFIX-8S-X 235 mm - cardboard packaging - 100 pcs.

Universal facade fixing with plain screw R-TFIX-8S-X 235 mm - cardboard packaging - 100 pcs.

Universal | NewBestseller

R-TFIX-8S-235-X

5906675417738

The most effective screw-in facade fixing for countersunk installation with the possibility of surface mounting

Define product parameters:

Length
Packaging and quantity

Catalog price for bx:

PLN 522.79

net | VAT 23%

Contact with us and check out our terms of cooperation

Accessories

Counterbore plastic cutter for EPS and mineral wool 63 mm - cardboard packaging - 1 pcs.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

Counterbore cutter for EPS and mineral wool 63x10 mm - cardboard packaging - 1 pcs.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

R-KWL Insulation retaining plate 90 mm, PA - cardboard packaging - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

R-KWL Insulation retaining plate 140 mm, PA - cardboard packaging - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

R-KWX Insulation retaining plate 110 mm with perforator - cardboard packaging - 100 pcs.

Joining retaining plate with perforator for countersunk installation in mineral wool insulation boards

R-KWX Insulation retaining plate 63 mm with perforator - cardboard packaging - 100 pcs.

Joining retaining plate with perforator for countersunk installation in mineral wool insulation boards

18V 100Nm Cordless impact drill driver, Set with R-RC Rawlcase, 2 batteries 5.0Ah and 6,5A charger - plastic case - 1 pc.

Impact drill/driver 18V 100 Nm for drilling and screwdriving depending on the hardness of the material.

18V 2.0J 20mm Cordless rotary hammer drill, Set with R-RC Rawlcase, 2 batteries 5.0Ah and 6,5 A charger - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

R-TFIX-CAP EPS 15 mm, grey - cardboard packaging - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

R-TFIX-CAP EPS 15 mm, white - cardboard packaging - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

R-TFIX-CAP EPS 63x10 mm, grey - cardboard packaging - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

R-TFIX-CAP EPS 63x10 mm, white - cardboard packaging - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

R-TFIX-CAP Mineral wool 63x10 mm - cardboard packaging - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

R-TFIX-8S-X Setting tool TX40 for countersunk installation, black - cardboard packaging - 1 pcs.

TX40 Setting tool with integrated disc for countersunk installation of screw-in fixing R-TFIX-8SX

R-TFIX-8S-X Setting tool TX40 for countersunk installation, plastic - cardboard packaging - 1 pcs.

TX40 Setting tool with integrated disc and perforator for countersunk installation of screw-in fixing R-TFIX-8SX

R-TFIX-8S-X Setting tool TX40 for countersunk installation, metal - plastic cardboard - 1 pcs.

TX40 Setting tool with integrated disc and perforator for countersunk installation of screw-in fixing R-TFIX-8SX

R-TFIX-8S-X Setting tool TX40 for surface installation, grey - cardboard packaging - 1 pcs.

TX40 Setting tool with integrated disc for surface installation of screw-in fixing R-TFIX-8SX, setting the flange flush with the surface of the insulation

Aggressor SDS Plus drill bits 8x250x310 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Brickdrill SDS PLUS non-impact drill bits 8.0x310 m - plastic hanger - 1 pc.

Drill bits for non-impact drilling in ceramic materials

Rebardrill SDS Plus drill bits 8x250x310 mm - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Product info

The most effective screw-in facade fixing for countersunk installation with the possibility of surface mounting

  • Unique design allows for high load-bearing capacities. This reduces the quantity of fixings required per square metre of insulation
  • Pre-assembled screw saves time and labour.
  • Countersunk installation possible with use of R-TFIX-TOOL-CS, R-TFIX-CSMP or additional R-KWX-63 plate with post-installed R-TFIX-CAP63 insulation cap and system bit R-TFIX-TOOL-BLACK.
  • Quick and easy installation in all substrates (categories A,B,C,D,E)
  • Unique sleeve compression zone for precision installations.
  • Installation flush with the surface possible with use of R-TFIX-TOOL-GREY system bit and post-installed R-TFIX-CAP15 insulation cap.
  • Plate stiffness (value 0.5 kN/mm) ensures smooth elevation surface and stable insulation system.
  • Installation with post-installed insulation cap R-TFIX-CAP63 in three versions: R-TFIX-CAP63-EPS-W, R-TFIX-CAP63-EPS-G, R-TFIX-CAP63-EPS-MW reduces heat transmission and results in a homogenous insulation surface
  • The shortest embedment depth at the maximum strength parameters.

Surface:

Concrete C12/15-C50/60 (Use category A)

Concrete C12/15-C50/60 (Use category A)

External wall panel of concrete C16/20 – C50/60 (Use category A)

External wall panel of concrete C16/20 – C50/60 (Use category A)

Solid Brick (Use category B)

Solid Brick (Use category B)

Solid Sand-lime Brick (Use category B)

Solid Sand-lime Brick (Use category B)

Vertically-perforated clay block (Use category C)

Vertically-perforated clay block (Use category C)

Hollow Sand-lime Brick (Use category C)

Hollow Sand-lime Brick (Use category C)

Hollow Lightweight Concrete Block (Use category D)

Hollow Lightweight Concrete Block (Use category D)

Autoclaved Aerated Concrete (Use Category E)

Autoclaved Aerated Concrete (Use Category E)

Hollow Brick (Use category C)

Hollow Brick (Use category C)

Lightweight Concrete Block (Use category C)

Lightweight Concrete Block (Use category C)

Reinforced components of lightweight aggregate concrete (Use category D)

Reinforced components of lightweight aggregate concrete (Use category D)

Approved surfaces

Usage:

Facades - thermal insulation systems

Plinths and finishing profiles

Substitutes

Product files

Assembly manual

Assembly step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Clean drilled hole 3 times.

3

Insert the R-TFIX-TOOL-BLACK into the head of the R-TFIX-8SX screw, insert the pin into the drilled hole.

4

After inserting the pin in the hole, the teeth of the KWX-63 perforating plate should be fully embedded in the thermal insulation.

5

Tighten the plug screw until the appropriate embedment depth is reached (the plate should be on one surface with the thermal insulation layer).

6

After fixing the connector, close the hole with a mineral wool plug.

7

Properly installed R-TFIX-8SX with KCX Clamping Collar.

Installation data

Files to download

Technical library and approvals

Choose document:

ETA-17/0161

DoP-17/0161 R-TFIX-8SX

1488-CPR-0544/Z

KOT-2021/1550

020_UWB-1064/Z

UKTA-22/6348

UKTA-DoP-22/6348-R-TFIX-8S

Product library

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

Product Catalogue

Leaflet R-TFIX-8S_SX

Rawlplug Academy