R-DCA-10-40-50B
5906675439136
Define product parameters:
Unit pack
50.00 pcs.1.12 kg
Bulk pack
900.00 pcs.20.67 kg
Pallet
28800.00 pcs.661.31 kg
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Internally threaded zinc plated wedge anchor
Approved surfaces
Length | Metric diameter | Coating | Type of package | Pieces. per pack. | Index | EAN | |
|---|---|---|---|---|---|---|---|
| 30 mm | M8 | ZP - galvanized | Cardboard box | 100 | R-DCA-08-30 | 5010445771200 | Contact with us and check out our terms of cooperation |
| 40 mm | M10 | ZP - galvanized | Cardboard box | 50 | R-DCA-10-40 | 5906675151687 | Contact with us and check out our terms of cooperation |
| 50 mm | M12 | ZP - galvanized | Cardboard box | 50 | R-DCA-12-50 | 5906675152004 | Contact with us and check out our terms of cooperation |
| 65 mm | M16 | ZP - galvanized | Cardboard box | 25 | R-DCA-16-65 | 5010445771507 | Contact with us and check out our terms of cooperation |
| 25 mm | M6 | ZP - galvanized | Cardboard box | 100 | R-DCA-06-25 | 5010445771088 | Contact with us and check out our terms of cooperation |
| 80 mm | M20 | ZP - galvanized | Cardboard box | 15 | R-DCA-20-80 | 5010445002298 | Contact with us and check out our terms of cooperation |
| 40 mm | M10 | ZP - galvanized | Plastic bag | 50 | R-DCA-10-40-50B | 5906675439136 | Contact with us and check out our terms of cooperation |
| 25 mm | M6 | ZP - galvanized | Plastic bag | 100 | R-DCA-06-25-100B | 5906675441221 | Contact with us and check out our terms of cooperation |
| 65 mm | M16 | ZP - galvanized | Plastic bag | 1 | R-DCA-16-65-15B | 5906675438115 | Contact with us and check out our terms of cooperation |
| 50 mm | M12 | ZP - galvanized | Plastic bag | 30 | R-DCA-12-50-30B | 5906675438108 | Contact with us and check out our terms of cooperation |
Drill the hole and clean it up.
Blow out dust at least 4 times with a hand pump.
Insert the anchor into the hole and hammer it in until it is flush with the substrate.
By striking the special hammer with the hammer, expand the anchor in the hole.
Place the element to be fastened, insert the screw or threaded rod and tighten to the required torque.
(8)
(1)
