Telescopic sleeve with round plate R-GOK 50x325 mm polypropylene - cardboard box - 50 pcs.
Universal
R-GOK-325
5906675108056
Define product parameters:
Length
Packaging and quantity
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Related products
Features
Telescopic sleeve for flat roof insulation fixings
- High impact - resistant material used ensures constant mechanical properties over the lifetime of a roof. Also, retains its properties over a wide temperature range.
- The lenticular shape of the plate ensures a firm pressure on the membrane and no possibility of dragging and deforming the plate during assembly
- Internal sleeve design allows pre-assembly with any Rawlplug roofing screw, shortening installation.
- The reduced diameter makes it easier to pierce the membrane and install in dense materials such as PIR / PUR and mineral wool
- The lower part of the connector telescope has been designed in the shape of a cone with an optimum angle of inclination which significantly affects the speed of its installation.
- Guarantees the highest load capacity of the roof construction for both static and dynamic loads in accordance with ETAG006.
Product video
Rawlplug Roofing Insulation Fixings R-GOK
Substrates
Approved surfaces
Applications
Substitutes
Services
Rawlplug Academy
Technical Support 2
Design Consulting
Designing
Installation guide
Installation manual
Installation step by step
1
Drill the hole of required diameter and depth.
2
Using drilling machine, drive the R-WBT screw into substrate until fixing depth is reached.
3
Properly mounted sleeve with R-WX screw.
4
Place the plastic sleeve with the WX screw in the insulating material.
5
Using a screwdriver, screw in the connector with the WX screw until the required depth is obtained.
6
Properly mounted sleeve with WX screw.