Telescopic sleeve with round plate R-GOK 50x525 mm polyamide - cardboard box - 50 pcs.
Solid walls
R-GOK-525-N
5906675113883
Define product parameters:
Length
Packaging and quantity
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Related products
Features
Telescopic sleeve for flat roof insulation fixings
- High impact - resistant material used ensures constant mechanical properties over the lifetime of a roof. Also, retains its properties over a wide temperature range.
- Should be used with combination of any Rawlplug roofing screws: R-WBT to concrete, R-WX/WO to steel sheat, R-WW to wood.
- Round plate eliminates the need of positioning the fixing during the installation, the bottom part of the connection sleeve is designed to carry very heavy loads during operation of the roof.
- Internal sleeve design allows pre-assembly with any Rawlplug roofing screw, shortening installation.
- The cone’s optimal shape facilitates speed and ease of installation through the thermal insulation.
- Guarantees the highest load capacity of the roof construction for both static and dynamic loads in accordance with ETAG006.
Product video
Rawlplug Roofing Insulation Fixings R-GOK
Substrates
Approved surfaces
Applications
Substitutes
Services
Design Consulting
Training at the Rawlplug Academy center
Design calculations
Technical Support 2
Installation guide
Installation manual
Installation step by step
1
Drill the hole of required diameter and depth.
2
Using drilling machine, drive the R-WBT screw into substrate until fixing depth is reached.
3
Properly mounted sleeve with R-WX screw.
4
Place the plastic sleeve with the WX screw in the insulating material.
5
Using a screwdriver, screw in the connector with the WX screw until the required depth is obtained.
6
Properly mounted sleeve with WX screw.