1. Mainpage
  2. Products
  3. Fixings
  4. Facade Fixings
  5. Accessories for Styrofoam Pins
  6. Pin Assembly Tools
  7. Counterbore cutter for EPS and mineral wool 63x10 mm - paper box - 1 pcs.

Counterbore cutter for EPS and mineral wool 63x10 mm - paper box - 1 pcs.

Universal

R-KFS-63/10

5906675493190

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

Define product parameters:

Packaging and quantity

Catalog price for pc:

PLN336.49

net | VAT 23%

Contact with us and check out our terms of cooperation

Related products

R-TFIX-CAP Mineral wool 63x10 mm - paper box - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

R-TFIX-CAP EPS 63x10 mm, white - paper box - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

R-TFIX-CAP EPS 63x10 mm, grey - paper box - 100 pcs.

Post-installed cap reduces heat transmission and results in a homogenous insulation surface

Rebardrill SDS Plus drill bits 8x150x210 mm - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Universal facade fixing with plain screw R-TFIX-8S-X 455 mm - paper box - 50 pcs.

The most effective screw-in facade fixing for countersunk installation with the possibility of surface mounting

Universal facade fixing with plain screw R-TFIX-8S-X 435 mm - paper box - 50 pcs.

The most effective screw-in facade fixing for countersunk installation with the possibility of surface mounting

Universal facade fixing with plain screwR-TFIX-8S-X 415 mm - paper box - 50 pcs.

The most effective screw-in facade fixing for countersunk installation with the possibility of surface mounting

Universal facade fixing with plain screw R-TFIX-8S-X 395 mm - paper box - 50 pcs.

The most effective screw-in facade fixing for countersunk installation with the possibility of surface mounting

Universal facade fixing with plain screw R-TFIX-8S-X 375 mm - paper box - 100 pcs.

The most effective screw-in facade fixing for countersunk installation with the possibility of surface mounting

Universal facade fixing with plain screw R-TFIX-8S-X 355 mm - paper box - 100 pcs.

The most effective screw-in facade fixing for countersunk installation with the possibility of surface mounting

Universal facade fixing with plain screw R-TFIX-8S-X 335 mm - paper box - 100 pcs.

The most effective screw-in facade fixing for countersunk installation with the possibility of surface mounting

Universal facade fixing with plain screw R-TFIX-8S-X 315 mm - paper box - 100 pcs.

The most effective screw-in facade fixing for countersunk installation with the possibility of surface mounting

Product info

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

  • Precise tool construction allows to cut polystyrene, polyurethane and mineral wool boards
  • Countersunk installation (with post-installed insulation cap) reduces heat transmission and results in a homogenous insulation surface.
  • Cost-saving solution, as countersunk installation allows selection of shorter fixings.
  • Facilitates and speeds up surface preparation for the final finish of the façade
  • Robust construction for increased service life

Surface:

Polystyrene (EPS) boards

Polystyrene (EPS) boards

Mineral wool boards

Mineral wool boards

Approved surfaces

Usage:

Facades - thermal insulation systems

Substitutes

Product files

Assembly manual

Assembly step by step

1

Cut the hole in insulation board.

2

Drill a hole of appropriate diameter and depth.

3

Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached.

4

Insert cap into countersunk hole in insulation board following installation of the facade fixing.

5

Proper recessed installation.

Files to download

Downloadable documents and publications

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

Product Catalogue

Rawlplug Academy