1. Mainpage
  2. Products
  3. Anchors
  4. Chemical fixings
  5. Vinylester bonded anchor R-KER standard - plastic cartouche - 300 ml

Vinylester bonded anchor R-KER standard - plastic cartouche - 300 ml

Solid walls

R-KER-300

5906675075167

Polyester bonded anchor without styrene, recommended for medium loads, for use in concrete

Define product parameters:

Packaging and quantity

Catalog price for pc:

PLN101.45

net | VAT 23%

Contact with us and check out our terms of cooperation

Related products

Turbodrill SDS Max drill bit 24x200x340 mm - plastic hanger - 1 pc.

SDS max drill for drilling deep holes in reinforced concrete, concrete, stone and hard brick

Metric threaded rod, hexagonal head, steel A4 STUDS 20x260mm - paper box - 5 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

Metric threaded rod, flat head, steel A4 STUDS 16x190mm - paper box - 10 pcs.

Threaded rod made of A4 stainless steel with flat head for use with bonded anchors

Metric threaded rod, hexagonal head, steel class 8.8 STUDS 20x260mm - paper box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

Metric threaded rod, hexagonal head, steel class 8.8 STUDS 16x190mm - paper box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

Manual gun for cartridges: 385/600ml(3:1), 280/300/310ml, 380-410ml (10:1), 4.5kN - paper box - 1 pc.

Professional manual gun for resin anchors in cartridges 385/600ml(3:1), 280/300/310ml, 380-410ml (10:1), 4,5kN

18V 2.0J 20mm Cordless rotary hammer drill, Set with R-RC Rawlcase, 2 batteries 5.0Ah and 6,5 A charger - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

Metal brush for cleaning holes M12 - label - 1 pc.

Metal brush with handle for cleaning holes in a solid substrate

Pump for blowing drill cuttings - plastic bag - 1 pc.

Manual blow pump for cleaning dust from drilled holes

Rebardrill SDS Plus drill bits 18x250x310 mm - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Dustlessdrill SDS Plus 18x250x370 mm drill bits - plastic hanger - 1 pc.

Hollow drill bits SDS plus for dust-free drilling in concrete

Rebardrill SDS Max drill bit 18x200x340 mm - plastic hanger - 1 pc.

SDS max drill with 3 symmetrically arranged cutting edges allow, for drilling holes in reinforced concrete, concrete, stone and hard brick

Product info

Polyester bonded anchor without styrene, recommended for medium loads, for use in concrete

  • Approved for use with rebar as an anchor for use in non-cracked concrete
  • Suitable for use in dry and wet substrates including flooded holes (use category I1 & I2).
  • Rapid bonding time enables quick execution of works
  • Very high load capacity
  • Anchor does not generate expansion forces in the concrete which means reduced spacing and edge distances.
  • Suitable for multiple use. Partly used product can be reused after fitting new nozzle

Surface:

Non-cracked Concrete

Non-cracked Concrete

Approved surfaces

Usage:

Anchoring glued in with reinforcing bars

Anchoring glued in with threaded rods

Balustrades

Barriers

Concrete structures

Electrical Installations

Elevators and escalators

Formwork

Gates

Handrails

Pipelines

Pitched roofs

Reinforcement of a large slab

Sanitary and gas installations

Steel structures

Ventilated facades

Substitutes

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 175 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard, grey - plastic cartouche - 300 ml

Polyester bonded anchor without styrene grey color, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard, stone - plastic cartouche - 300 ml

Polyester bonded anchor without styrene beige color, recommended for medium loads, suitable for use in most construction substrates

Vinylester bonded anchor R-KER standard - plastic cartouche - 400 ml

Polyester bonded anchor without styrene, recommended for medium loads, for use in concrete

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Hybrid chemical anchor R-KERII - plastic cartouche - 345 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Product files

Assembly manual

Assembly step by step

1

Blow out the dust at least 4 times with the hand pump.

2

Drill a hole to the required diameter and depth for rebar size being used.

3

Clean drilled hole 4 times.

4

Remove drill cuttings from the hole using the hand pump four times.

5

Place the cartridge in the dispenser.

6

Dispense to waste until even colour is obtained.

7

Fill with resin 70% of the depth of the hole, starting from the bottom of the hole.

8

Immediately after dispensing the resin, insert the rod into the hole with a twisting motion.

9

Remove the unnecessary amount of resin that flowed from the hole and wait for the appropriate time for the resin to cure.

10

Immediately insert the rebar, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.

11

Place the bar in the hole and allow the setting time to elapse.

12

Attach fixture and tighten the nut to the required torque.

13

Drill a hole of appropriate diameter and depth.

14

Wydmuchać pył co najmniej 4 razy przy pomocy ręcznej pompki.

15

Usunąć zwierciny z otworu za pomocą czterokrotnego użycia wyciora

16

R_KEX_385_stud_inst_draw_04

17

Umieścić kartridż w dozowniku i przymocować dyszę mieszającą

18

Rozpoczynając dozowanie z nowego opakowania odrzucić część żywicy, aż do uzyskania jednakowego koloru mieszanki

19

Insert the mixing nozzle to the far end of the hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.

20

Immediately after dispensing the resin, insert the rod into the hole with a twisting motion.

21

Leave the anchor undisturbed unitl the curing time elapses.

22

Reinforcing bar is properly installed in the concrete base.

Files to download

Technical library and approvals

Choose document:

ETA-10/0055

1488-CPR-0161/W

DoP-10/0055-R-KER

ETA-12/0319

1488-CPR-0738/W

DoP-12/0319-R-KER

ETA-13/0805

1488-CPR-0695/W

DoP-13/0805-R-KER

UKTA-0836-22/6107

UKTA-DoP-22/6107-R-KER

UKTA-0836-22/6110

UKTA-DoP-226110-R-KER

KOT-2018/0134

KDWU-2018-0134-1

Hygienic Certificate - R-KER

Fire Evaluation Report - R-KER

VOC Emission Test Report - R-KER

SDS_R-KER_CFS_01.03.2023

Downloadable documents and publications

Choose product card:

Product card R-KER with Rebar as an Anchor

Product card R-KER with Threaded Rods

Product card R-KER with Internally Threaded Sockets (ITS)

Product card R-KER with Post-Installed Rebars

Choose product catalog:

Specification Design Guide

Product Catalogue

Rawlplug Academy

Chemical anchors, general characteristics and application - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors, basics of anchoring technology - temperature - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors basics of anchoring technology - substrates - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors basics of anchoring technology - rods- E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors general installation rules - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors - introduction and correct installation of anchors - ON-SITE TRAINING

Rules for the correct use of chemical anchors and their applications.

R-KERII - hybrid resin - ON-SITE TRAINING

You will learn what the R-KER II Rawlplug hybrid concrete chemical anchor is and what it is used for. You will understand its advantages as well as the features and benefits that determine its use. You will test the assembly yourself.

R-CAS-V and R-HAC-V - chemical anchoring ampoule system - ON-SITE TRAINING

There is no easier installation of chemical anchors than chemical ampoules. For use at short distances and close to edges with threaded or rebar. Learn the characteristics and test the installation of chemical ampoules.

Post-installed rebar technology - ON-SITE TRAINING

Professional training showing the entire rebar installation process.

Chemical anchors - introduction and correct installation of anchors - TRAINING CENTER

Rules for the correct use of chemical anchors and their applications.

R-KERII - hybrid resin - TRAINING CENTER

You will learn what the R-KER II Rawlplug hybrid concrete chemical anchor is and what it is used for. You will understand its advantages as well as the features and benefits that determine its use. You will test the assembly yourself.

R-CAS-V and R-HAC-V - chemical anchoring capsule system - TRAINING CENTER

There is no easier installation of chemical anchors than chemical ampoules. For use at short distances and close to edges with threaded or rebar. Learn the characteristics and test the installation of chemical ampoules.

Post-installed rebar technology - TRAINING CENTER

Professional training showing the entire rebar installation process.

Road and bridge fixings design calculation - SERVICE

Support in designing from the Engineers of the Technical Department, practitioners and market experts guarantees that the specifics and requirements for specific solutions are taken into account.

Concrete fixings design calculation - SERVICE

Support in designing from the Engineers of the Technical Department, practitioners and market experts guarantees that the specifics and requirements for specific solutions are taken into account.

Masonry fixings design calculation - SERVICE

Support in designing from the Engineers of the Technical Department, practitioners and market experts guarantees that the specifics and requirements for specific solutions are taken into account.

Post-installed rebars design calculation - SERVICE

Support in designing from the Engineers of the Technical Department, practitioners and market experts guarantees that the specifics and requirements for specific solutions are taken into account.

Bonded anchors on-site test - SERVICE

On-Site Tests include strength tests of Rawlplug products in the place and conditions of their actual use, and what's more, we also test the bearing capacity of the substrate.