R-KEX-II-385
5906675028538
High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete
Define product parameters:
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete
Rawlplug R-KEX-II Pure Epoxy Resin and Rebar
Approved surfaces
Drill a hole of appropriate diameter and depth.
Wydmuchać pył co najmniej 4 razy przy pomocy ręcznej pompki.
Usunąć zwierciny z otworu za pomocą czterokrotnego użycia wyciora
Blow out the dust at least 4 times with the hand pump.
Umieścić kartridż w dozowniku i przymocować dyszę mieszającą
Rozpoczynając dozowanie z nowego opakowania odrzucić część żywicy, aż do uzyskania jednakowego koloru mieszanki
Fill the hole 70% with resin (follow the assembly instructions specific to the type of resin).
Immediately insert the rebar, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
Leave the anchor undisturbed unitl the curing time elapses.
Tighten to the recommended torque.
Immediately after dispensing the resin, place the rod in the hole and allow the resin to set properly.
Leave the anchor undisturbed unitl the curing time elapses.
Reinforcing bar is properly installed in the concrete base.
Screw the rod into the sleeve with internal thread placed in the hole.
Place the bar in the hole and allow the setting time to elapse.
Attach fixture and tighten the nut to the required torque.
