1. Mainpage
  2. Metric threaded rod, flat head, steel class 8.8, zinc flake STUDS 12x380mm - cardboard box - 10 pcs.

Metric threaded rod, flat head, steel class 8.8, zinc flake STUDS 12x380mm - cardboard box - 10 pcs.

Universal

R-STUDS-1238088ZFF

5906675469690

Rawlplug

Threaded rod made of class 8.8 steel with flake galvanization and flat head for use with bonded anchors

Define product parameters:

Diameter
Length
Rod end
Corrosion protection
Packaging and quantity

Related products

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 600 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard, stone - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 385 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 175 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Hybrid bonded anchor R-KER-II winter version - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates - winter version

SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.

SDS plus Rotary hammer 850W 2,5J 26 mm RAWLCASE

Hybrid bonded anchor R-KER-II winter version - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates - winter version

18 V RawlWRENCH 210 Nm Impact driver, Set with RawlCASE, 2 batteries 5.0 Ah and 6.5A RawlCHARGER - plastic case - 1 pc.

18V Impact driver with 210 Nm torque equipped with universal handle - inner 1/4" and external 1/2" - allows you to work with bits and caps.

Features

Threaded rod made of class 8.8 steel with flake galvanization and flat head for use with bonded anchors

  • Threaded rods provide high strength and good wear resistance
  • Flat head for quick manual installation without a setting tool
  • Can be post-installed through fixture in some cases. (Consult technical advisory service)
  • Suitable for use with special mesh sleeves in hollow substrates.
  • Special zinc flake corrosion-resistant coating

Substrates

Cracked concrete

Cracked concrete

Non-cracked concrete

Non-cracked concrete

Clay block

Clay block

Aerated concrete

Aerated concrete

Aerated concrete block

Aerated concrete block

Brick

Brick

Hollow brick

Hollow brick

Approved surfaces

Applications

Air conditioning / ventilation

Anchoring glued in with threaded rods

Barriers

Blinds and awnings

Boilers

Ceiling mounts

Elevators and escalators

Glass facades

Pipelines

Poles and road signs

Seats in public facilities

Steel structures

Tunnels

Ventilated facades

Substitutes

Services

Design Consulting

Design Consulting

Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

Technical Support 2

Technical Support 2

EasyFix

EasyFix

Installation guide

Installation manual

Installation step by step

1

Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product).

2

Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached.

3

Leave to solidify for the time required for the application.

4

Attach fixture and tighten the nut to the required torque.

5

Item is properly attached.

Approvals and publications

Product card and catalogues

Choose product card:

Product card R-STUDS Metric Threaded Rods - Steel Class 1.4529 HCR, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class A4

Product card R-STUDS Metric Threaded Rods - Steel Class A4, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class A2, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 10.9

Product card R-STUDS Metric Threaded Rods - Steel Class 10.9, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8, Hot Dip Galvanized

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8, Hot Dip Galvanized, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8, Zinc Flake, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Hot Dip Galvanized

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Hot Dip Galvanized, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Zinc Flake

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Zinc Flake, Flat Head

Choose product catalog:

Specification Design Guide

General catalogue - PDF

Stay up to date

Sign up for our newsletter and don't miss:

Information

on our products and services

News

on the offering and latest promotions

Reports

on events, trade shows and industry conferences

© 2024 Koelner Rawlplug IP