1. Mainpage
  2. Products
  3. Anchors
  4. Chemical fixings
  5. Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Solid walls

R-KER-II-300

5906675293738

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Define product parameters:

Bonded anchors version
Packaging
Packaging and quantity

Catalog price for pc:

PLN76.16

net | VAT 23%

Contact with us and check out our terms of cooperation

Related products

Turbodrill SDS Max drill bit 24x200x340 mm - plastic hanger - 1 pc.

SDS max drill for drilling deep holes in reinforced concrete, concrete, stone and hard brick

Metric threaded rod, hexagonal head, steel A4 STUDS 20x260mm - paper box - 5 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

Metric threaded rod, flat head, steel A4 STUDS 16x190mm - paper box - 10 pcs.

Threaded rod made of A4 stainless steel with flat head for use with bonded anchors

Metric threaded rod, hexagonal head, steel class 8.8 STUDS 20x260mm - paper box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

Metric threaded rod, hexagonal head, steel class 8.8 STUDS 16x190mm - paper box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

Manual gun for cartridges: 385/600ml(3:1), 280/300/310ml, 380-410ml (10:1), 4.5kN - paper box - 1 pc.

Professional manual gun for resin anchors in cartridges 385/600ml(3:1), 280/300/310ml, 380-410ml (10:1), 4,5kN

18V 2.0J 20mm Cordless rotary hammer drill, Set with R-RC Rawlcase, 2 batteries 5.0Ah and 6,5 A charger - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

Blow-through nozzle for cleaning of holes M14-M20 - plastic bag - 1 pc.

Tip for blowing holes R-NOZ-ADAPTER

Extension for R-BRUSH-TC with a handle - label - 1 pc.

Extension with handle for manual cleaning of deep holes in a solid substrate

Rigid extension for mechanical cleaning with SDS+ drive R-BRUSH-TC - plastic bag - 1 pc.

Rigid extension with SDS+ for automatic cleaning of deep holes in a solid substrate

R-BRUSH Steel brush for cleaning of deep holes, 16mm - plastic box - 1 pc.

Steel cleaning brush for cleaning drilled holes with the possibility of extension

Pump for blowing drill cuttings - plastic bag - 1 pc.

Manual blow pump for cleaning dust from drilled holes

Product info

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

  • Approved for use in non-cracked concrete (EAD 330499-01-0601), working life up to 100 years
  • Suitable for use in dry and wet substrates including flooded holes (use category I1 & I2).
  • For faster curing winter version of the resin can be used
  • No need for hole cleaning when using Dustlessdrill bit
  • Special nozzle with longer mixer for more comfortable and precise application
  • Suitable for multiple use. Partly used product can be reused after fitting new nozzle
  • Very high load capacity
  • Tests in fire conditions confirm the fire resistance up to R120

Surface:

Cracked concrete C20/25-C50/60

Cracked concrete C20/25-C50/60

Unreinforced concrete

Unreinforced concrete

Reinforced concrete

Reinforced concrete

Non-cracked concrete C20/25-C50/60

Non-cracked concrete C20/25-C50/60

Approved surfaces

Usage:

Construction work

Anchoring glued in with threaded rods

Cabinets, brackets and wall brackets

Seats in public facilities

Steel structures

Storage racks

Swings

TV brackets

Anchoring glued in with reinforcing bars

Substitutes

Hybrid bonded anchor in foil 600ml - paper box - 8 pcs.

Bonded anchor based on hybrid resin in 600ml foil loads

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 175 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard, stone - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Hybrid chemical anchor R-KERII - plastic cartouche - 345 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 385 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 600 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Product files

Assembly manual

Assembly step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Remove drill cuttings from the hole using the hand pump four times.

3

Remove drill cuttings in the hole using the brush four times.

4

Wydmuchać pył co najmniej 4 razy przy pomocy ręcznej pompki.

5

Insert cartridge into the gun and attach the nozzle.

6

Dispense to waste until even colour is obtained (min. 10 cm).

7

Insert the mixing nozzle to the far end of the hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.

8

Attach the fixture.

9

The mount is ready to use.

10

Immediately after dispensing the resin, place the rod in the hole and allow the resin to set properly.

11

Leave the anchor undisturbed unitl the curing time elapses.

12

Chemical anchor with the rod is correctly installed.

13

Screw the rod into the sleeve with internal thread placed in the hole.

14

Place the bar in the hole and allow the setting time to elapse.

15

Properly installed sleeve with internal thread in the concrete base.

Files to download

Technical library and approvals

Choose document:

ETA-21/0242

1488-CPR-0945/W

DoP-21/0242-R-KER-II

ETA-17/0874

1488-CPR-0748/W

DoP-17/0874 R-KER-II-S

UKTA-0836-22/6130

UK 0836-CPR-23/P6730

UKTA-DoP-22/6130-R-KER-II

UKTA-0836-22/6128

UK 0836-CPR-23/P6760

UKTA-DoP-22/6130-R-KER-II

KOT-2018/0134

KDWU-2018-0134-1

Hygienic Certificate - R-KER II

Fire protection assessment - R-KER II

Fire protection assessment for post-installed rebar connections - R-KER II

VOC Emission Test Report - R-KER II

SDS_R-KER-II_01.03.2023

SDS_R-KERII_CFS_01.03.2023

Downloadable documents and publications

Choose product card:

Product cart

Product cart

Choose product catalog:

Specification Design Guide

Product Catalogue

Rawlplug Academy

Chemical anchors, general characteristics and application - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors, basics of anchoring technology - temperature - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors basics of anchoring technology - substrates - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors basics of anchoring technology - rods- E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors general installation rules - E-LEARNING

A series of proprietary trainings will allow you to gain knowledge even in difficult, technical areas. You learn, test your knowledge and monitor the effects in a convenient place and time.

Chemical anchors - introduction and correct installation of anchors - ON-SITE TRAINING

Rules for the correct use of chemical anchors and their applications.

R-KERII - hybrid resin - ON-SITE TRAINING

You will learn what the R-KER II Rawlplug hybrid concrete chemical anchor is and what it is used for. You will understand its advantages as well as the features and benefits that determine its use. You will test the assembly yourself.

R-CAS-V and R-HAC-V - chemical anchoring ampoule system - ON-SITE TRAINING

There is no easier installation of chemical anchors than chemical ampoules. For use at short distances and close to edges with threaded or rebar. Learn the characteristics and test the installation of chemical ampoules.

Post-installed rebar technology - ON-SITE TRAINING

Professional training showing the entire rebar installation process.

Chemical anchors - introduction and correct installation of anchors - TRAINING CENTER

Rules for the correct use of chemical anchors and their applications.

R-KERII - hybrid resin - TRAINING CENTER

You will learn what the R-KER II Rawlplug hybrid concrete chemical anchor is and what it is used for. You will understand its advantages as well as the features and benefits that determine its use. You will test the assembly yourself.

R-CAS-V and R-HAC-V - chemical anchoring capsule system - TRAINING CENTER

There is no easier installation of chemical anchors than chemical ampoules. For use at short distances and close to edges with threaded or rebar. Learn the characteristics and test the installation of chemical ampoules.

Post-installed rebar technology - TRAINING CENTER

Professional training showing the entire rebar installation process.

Road and bridge fixings design calculation - SERVICE

Support in designing from the Engineers of the Technical Department, practitioners and market experts guarantees that the specifics and requirements for specific solutions are taken into account.

Concrete fixings design calculation - SERVICE

Support in designing from the Engineers of the Technical Department, practitioners and market experts guarantees that the specifics and requirements for specific solutions are taken into account.

Masonry fixings design calculation - SERVICE

Support in designing from the Engineers of the Technical Department, practitioners and market experts guarantees that the specifics and requirements for specific solutions are taken into account.

Post-installed rebars design calculation - SERVICE

Support in designing from the Engineers of the Technical Department, practitioners and market experts guarantees that the specifics and requirements for specific solutions are taken into account.

Bonded anchors on-site test - SERVICE

On-Site Tests include strength tests of Rawlplug products in the place and conditions of their actual use, and what's more, we also test the bearing capacity of the substrate.